Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz

DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment ra

The RB4011 uses the amazingly powerful quad core cortex A15 chip from annapurna labs, an amazon company, same as in your grade rb1100AHx4 unit. The CPU supports IPsec hardware acceleration, there is 1GB of RAM, so this device will easily handle any tas

±48 V DC telecom Open Frame Power supply with 12 V 8 A output, for use with new “r2” revision of Cloud Core Routers. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for -48 V installations. Compatibility

Outdoor 4-port SFP+ switch without fan and with fins on the back with routing option offers Gigabit Ethernet for management or PoE IN power supply, 4 optical SFP+ ports with speed 1/10 Gbps, console RJ45 port, DC con

CCR2004-1G-2XS-PCIe is a very smart and standalone router with RouterOS installed with L6 license and powered by your server or computer with its own computing CPU 1.5GHz clock and 4 cores for firewall, access control for home multimedia and file serve

CCR2004-16G-2S+PC is a desktop or rackmount router up to 19" rack from the new line of CCR routers, which comes with passive cooling and the highest ratio power per 1 core of all CCRs, which is the most important aspect for more deman

No need to buy several antennas for your Internet-of-things setups – just grab the new HGO-LTE-W antenna that can handle an impressive frequency spectrum 699MHz – 3,8GHz. That’s right – you can use the same antenna for LTE, CAT-M/NB and LoRa con

Power adapter with output voltage 57V DC, maximum current 0.8A, total output power 45,6W and connector 5.5 / 2.1mm. The power source is part of the MikroTik GPEN concept, which provides all the benefits of GPON.

FTC11XG is a 10Gbps fiber-to-metal converter with an implemented switch-chip, SwOS Lite management (VLAN support, LAG, IGMP, SNMP, ACL, traffic shaping...) in outdoor design with IP55 protection. This converter has one Gigabit LAN port wi

Rackmount kit RMK-2/10 allows the installation of two smaller MikroTik devices with a width of 200mm in traditional 19 inch data cabinets. Alternatively, you can permanently remove the longer part from both brackets and install only o

Chateau LTE6 ax is a Dual Band home WiFi router with 5x Gigabit LAN ports and LTE category 6 modem including one USB 2.0 port and a micro SIM card slot. The wireless part of 2.4 GHz provides a modulation speed of

The CME Gateway is a rugged and affordable CAT-M LTE modem designed for connecting sensors and IoT devices to the mobile network. The modem provide LTE Cat NB2 and LTE Cat M1 extremely efficient, low-cost, low-bandwidth mobile internet co

The MikroTik Cloud Smart Switch CSS318-16G-2S+IN is a smart manageable switch with 16x Gigabit LAN ports and 2x SFP+ slots supporting 1, 2.5, and 10 Gbps. Its fanless design ensures silent operation. The switch can be installed in

High-performance dual-band home access point with Wi-Fi 6 technology, designed for advanced users. This latest model is equipped with a powerful quad-core ARM processor running at 2.2 GHz, allowing it to handle increased traffic. With 4x4 MIM

An extra cost-effective upgrade of our previous R11 LTE4 modem. It offers the same speed (up to 150 Mbps) and features as the earlier version.

R11eL-FG621-EA is an LTE modem in mini PCIe card format. It supports LTE and 3G technologies. It is a high quality modem that has 300 Mbps downlink and 50 Mbps uplink. Thanks to carrier aggregation, the device can use multiple bands sim

Quality outdoor access point from Mikrotik ready to work as LTE router or modem. It is equipped with 3 miniSIM slots to get a signal almost everywhere thanks to automatic roaming. The availability of one miniPCI-e slot allows expansion for example for

The new L23UGSR-5HaxD2HaxD is a dual-band WiFi6 upgrade of the popular RB922 DIY router. You can use it to build custom low-cost outdoor access points or CPEs – for your home, office, homelab needs or even to launch your own products, suc

The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE, it can also provide a range of useful software features: Interface mana

MikroTik netPower Lite 7R is a reverse PoE switch with 8x Gigabit ethernet ports, two SFP ports, DC power connector, DC terminal and SwOS operating system. The first 7 LAN ports allow power through PoE IN and 8th port supports PoE out

Original MikroTik power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering MikroTik devices with an input voltage 24V DC. The power adapter has a maximum power of 29W and a maxi

Inside the heavy-duty case, there is a powerful 2.4 GHz wireless access point with a Gigabit Ethernet port, built-in GPS and two internal LTE antennas. There are two miniPCIe slots – one is used for the LTE modem, the other one is populated with the co

The new flagship Cloud Core Router 2216 with a very strong configuration designed for the most exposed places of your network and in compared to CCR1072 it is up to 4x more powerful!. There is 12x SFP28 at 1/10/25 Gbps,

A very elegant metal and easily mountable mounting frame from MikroTik, size 19" with height 10U is suitable for laboratory tables, exhibitions or demonstrations. It is not new and revolutionary product, it is more of a trifle that ca

2.4GHz LoRa omnidirectional antenna with 8 dBi gain for the 2400 - 2500 MHz band with one SMA female connector and 55cm height. The package includes a detachable 1m long pigtail with SMA male tips and a holder for mounting on a pole wi

Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 1 meters long – the perfect length to reac

Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reac

Chateau 5G kit is a Dual-band 2.4/5GHz home wifi router with 5x Gigabit LAN ports and LTE modem category 20 including one USB port. Thus, the user can simultaneously use the 2.4GHz channel for associated mobile wireless devices and have the 5GHz

The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. MikroTik GPEN The GPEN11 is part of the GPEN (Giga