Power cables and adapters
Extension cords
AC cables and adapters(10)
DC cables(21)
DC adapters and reductions(10)
Connection between battery(14)
Crimping eye terminal(4)
Reduction jack / terminal, MALE standard DC 2.1 / 5.5 power connector (for CCTV cameras)
Adapter from a two-pole terminal block to standard DC jack with size 2.1/5.5mm. Adapter is suitable for powering analog cameras or other devices without PoE technology. Just bring a two line DC cable and simply connect it to the terminal block m
Reduction jack / terminal, FEMALE standard DC 2.1 / 5.5 power connector (for CCTV cameras)
The F-21-55 is a power adapter from a two-pole terminal block to a socket for a standard DC jack with a size of 2.1/5.5mm. Adapter is suitable, for example, when you need to connect an LED strip to your power adapter, which has prepared cables m
Cable adapter from UPS (IEC C14) to 1 socket 230V, 30cm
Cable reduction with 1 power socket for connection to UPS with IEC connectors. Completely product length is 30cm.
Teltonika 4 pin power cable with screw terminal, 2m
Teltonika 2m power supply cable terminated at one end with a 4-pin connector and at the other end with a screw terminal block. The cable is primarily intended for powering the following Teltonika devices: RUT230
Power splitter ACB-2CH, 2x male, 1x female
Rozbočovací kabel DC napájení s konektory 2x samec (male) na 1x samice (female). Konektory mají rozměry 2.1/5.5mm a celková délka je 19cm.
Maxlink adapter for UPS(3 sockets), max. 250V, 10A, length 30cm
Cable adapter with three sockets for connection to UPS with IEC connectors. Specifications Cable length 30 cm Max. operating current 10 A Nominal voltage 250 V IEC C14 plug CEE 7/5 (E)
DC-DC cable between battery and power source, 30cm, M6 hole - wire end
An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur
Pressing connector GF-M6, 6mm hole, yellow isolation
Conductor cross section 4.0 - 6.0 mm2 Material: electrolytic copper, tinned PVC insulation, with extended insulation sleeve, suitable for harmonized cables
The power cable connector with terminal
Napájecí kabel WT-1L je dlouhý 11cm, je zakončený na jednom konci DC napájecím konektorem typu samec o rozměrech 2.1/5.5mm a na druhém konci zančeným svorkou/čokoládou. Kabel je vhodný např. pro nahrazení původního konektoru u zdroje.
DC-DC cable between batteries, 15cm, 2x M6 hole
The DC link cable terminated by ears on both sides is ideal for connecting M6 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a
Ubiquiti UniFi Smart Power Cable, USP-Cable
USP-Cable is a special DC power cable designed for the Ubiquiti SmartPower System. This cable connecting UniFi Switch and the UniFi SmartPower (USP-RPS) from which it will receive power if the built-in power source fails. The cable is 1.5m l
Ubiquiti UACC-Cable-PT-0.5M - UISP power TransPort cable, 0.5m
Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 0.5m long. The cable is very robust, contains 2 wires
Strips Power ACB-4CH
Typ konektoru: 2.1/5.5 mm Jednoduchá zásuvka / 4 x 2.1/5.5 mm Třída kabelu; Materiál: PET; Délka kabelu: 4 x 0.21 m; Vybrané vlastnosti: • Velmi jednoduchá a rychlá montáž; Hmotnost: 0.032 kg; Rozměry (DxŠxV): 150x30x30 mm; Balení: Žádné
1.5 m DC cable (with 2.1/5.5 connector) straight
POZOR !!!; Před připojením je nutné zkontrolovat polarizaci kabelu. SPECIFIKACE; Typ konektoru: O 2.1 / 5.5 mm Třída kabelu; Připevňování vodiče: Pájení; Délka kabelu: 1.5 m; Určení: Elektrický kabel; Materiál: PET; Příklad použití: • OMY-2X0.75; • K-6...
DC-DC cable between battery and power source, 30cm, M8 hole - wire end
An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M8 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur
C-TECH Power cord 230V, 1,8m
PC-186-VDE power cord with VDE approval German plug power cord with VDE approval 6 ft bulk packing
MaxLink power cord 230V, 3-conductor, 1.2m, tinned connectors, CZ standard
3-conductor power cord with shielded tinned end of the wires on one side. It is a cable designed to connect industrial power resources to the power supply. This cable has 0.5m length of and match the Czech version (brown lead is connected to the
1.5 m DC cable (with 2.1/5.5 connector) corner
Před připojením je nutné zkontrolovat polarizaci kabelu. SPECIFIKACE; Typ konektoru: O 2.1 / 5.5 mm Úhlový konektor; Připevňování vodiče: Pájení; Délka kabelu: 1.5 m; Určení: Elektrický kabel; Materiál: PET; Příklad použití: • OMY-2X0.75; • K-60; • YAP
Power distributor LZ-8 (8 outputs)
LZ-8/POL je pasivní zařízení a umožňuje distribuci napájení. Nespornou výhodou použití LZ-8/POL v monitorování systému napájeného z centrálního místa, je dodatečná ochrana proti přerušení. Bez individuální ochrany každého napájecího vedení může narušit...
Strips Power ACB-8CH
Rozbočovací kabel napájení, konektory 1x FEMALE (samice) na 8x MALE (samec). Typ konektoru: 2.1/5.5 mm / Jednoduchá zásuvka / 8 x 2.1/5.5 mm Třída kabelu; Materiál: PET; Délka kabelu: 8 x 0.21 m; Vybrané vlastnosti: • Velmi jednoduchá a rychlá montáž; ...
Extension Cable 5 m 6x socket
Extension Cable 5 m 6x socket
Schuko to UK/IRL 13A plug adapter SCP3
European EU Schuko to UK 3 Pin Converter Plug 13A, Black (Grounded). A mains adaptor allowing mains leads with European type circular Schuko plugs to be converted into UK, 3-pin mains plug. Suitable for straight and most right angle Sch
Teltonika PR4MK04K 4-Pin terminal
4-pin socket with contact terminal for Teltonika devices.
Teltonika PR5MEC21 - 4-Pin Power Adapter With I/O Access
Teltonika PR5MEC21 is adapter intended mainly for routers from Teltonika. The adapter enables control using IoT devices like as Raspberry Pi, etc.
Teltonika PR2PD01B - 4-Pin to Barrel Socket Adapter
Adapter from 5.5 x 2.1 to 4-pin. Length is 10 cm
DC-DC cable between battery and power source, 60cm, M8 hole - wire end
An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M8 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur
DC-DC cable between battery and power source, 90cm, M8 hole - wire end
An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M8 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur
DC-DC cable between battery and power source, 120cm, M8 hole - wire end
An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M8 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur
Napájecí kabel s vypínačem pro světlo do rozvaděče
Power cable with a switch, featuring a DC female connector 5.5 / 2.1 mm on the input side and bare contacts on the output side. Cable is 22AWG, switch with a current limit of 2A. Total cable length 150 cm: 100 cm DC connector t
DC-DC cable between batteries, 30cm, 2x M6 hole
The DC link cable terminated by ears on both sides is ideal for connecting M6 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a