Our toughest long-range outdoor access point – now with WiFi6! The NetMetal ax is equipped with dual-band WiFi6, 1G ETH port and 2.5G SFP port. With an IP66 certification and a durable design, it is one of the manufac

Optical Cloud Router Switch CRS510-8XS-2XQ-IN is a suitable 19" rackmount solution for 100 Gbps network distribution and as a small central optical switch that offers 8x SFP28 with a speed of 25 Gbps, 2x QSFP28 with

If you are working with substantial amount of data – like providing Internet access or maintaining a huge data center – this is the perfect upgrade for your setup. CRS326-24S+2Q+RM is our first product with 40 Gbps QSFP+ ports for remarkably fast and s

MikroTik Cloud Router Switch CRS354-48P-4S+2Q+RM is very powerfull switch with 2x QSFP+, 4x SFP+, 48x Gigabit and one 10/100Mbps metalic port only for management. Switch provides total throughput 168 Gbps and switching capacity 336 Gbps with 235 Mpps f

High power 4920-5920MHz 802.11a/n dual chain wireless card in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e. The card features built-in LED indicators for wireless mode, connection s

Original MikroTik power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 19W and

S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM. Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD,

The quickMOUNT pro LHG is a advanced wall or pole mount adapter for our new LHG antennas. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set an

RBcAP2nD (ceiling Access Point) is 300Mbps 2.4GHz ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc. RBcAP2nD supports 802.11b/g/n an

The SXTsq Lite2 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite2 retains a 10 dBi ant

Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports. Moreover, it also has 4 x 10G c

The mANT LTE is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices, such as the wAP LTE and LtAP series. The antenna has a 5 dBi gain, improving your connection in

SwOS/RouterOS powered 24 port Gigabit Ethernet desktop switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you pr

NetPower 16P or CRS318-16P-2S+OUT is an outdoor 16-port Gigabit PoE switch for powering IP cameras, PTP or PTMP Wireless devices with a maximum consumption of 34W/port, total PoE budget 300W, IP55 protection and wall or mast mounting. The

GESP+POE-IN is a passive Gigabit PoE injector with integrated Ethernet surge protection with one Ethernet port and on the other side is cable with RJ45 connector and ground cable terminated with a loop. This version is intended for indoor use on

LoRa omnidirectional antenna with 6.5dBi gain for the 824 - 960MHz band with one SMA female connector and IP66 protection. The package includes a detachable 1m long pigtail with SMA male tips and a holder for mounting on a pole with a

This version of our BLE tags comes completely sealed, cast in industrial-grade molds to give it a solid IP69k ingress protection rating. In other words, this tag is dust-tight – nothing gets in, and it is fully protected against close-ran

RB5009UPr+S+OUT is a high performance PoE router that comes with passive cooling, IP66 outdoor chassis and high performance (60 - 90% higher than RB4011) which is due to the 64-bit ARM architecture of the proc

The optical-metallic Cloud Router Switch CRS326-4C+20G+2Q+RM with installation in a 19" rack is an ideal solution for building a 2.5 Gbps LAN network. The switch contains 20x 100/1000/2500 Mbps ethernet, 4x combo 2.5 Gbps (LAN) / 10 Gbps

FTC21 is an optical-metallic converter equipped with a switch chip, SwOS Lite management (supporting VLAN, LAG, IGMP, SNMP, ACL, traffic shaping, etc.), in an outdoor enclosure with IP55 protection. This converter features 2x Gigabit LAN

Mikrotik introduces the new Chateau LTE12 (2025) with an upgraded LTE modem. The Chateau LTE12 (2025) is a dual-band home WiFi router with 5x Gigabit LAN ports and a category 12 LTE modem, including a USB port. The modulation speed of the 2.4GHz

The XQ+CM0000-XS+ adapter is the perfect accessory for CR504, CRS518, CRS510 switches and other devices with QSFP28 (100Gbps) or QSFP+ (40Gbps) ports. Thanks to this adapter, lower speed modules can be used in higher speed slots. If you do not c

MikroTik Cloud Router Switch CRS518-16XS-2XQ-RM is a feature-packed backbone switch for your network and features 2× QSFP28 (100 Gbps), 16× SFP28 (1/10/25 Gbps), one 10/100Mbps metal port intended

The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. T

The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT gives

12POW150 is replacement Hot Swap power source for MikroTik CCR1072-1G-8S+. Total output power is 150W.

Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new revision is slightly higher, to fit more miniPCI card models. Ships with different faceplate stickers, to match used ports. Fits RB433 series products.

CA411-711 is new indoor case for RB411, RB911, RB912 and RB922 series. It has changeable front panels, so you can choose one that fits the product that you actually use. Also, case is higher to accommodate high-power wireless cards and has wall mountin

24HPOW is a power adapter with a maximum output voltage of 24V, a current of max. 2.5A and a total power of 60W. The power adapter has a standard 2.1 / 5.5mm connector. The package includes a power cord.

The Sleeve30 kit for mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce impact on adjacent RF devices by removing the side radiation from the antenna. Sleeve30 Kit also reduces