MikroTik

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires

The quickMOUNT pro is a advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The

48V 2A 96W power supply, to be used with MikroTik products that support 48V POE output, like hEX PoE and CRS112-8P-4S-IN. It’s providing 30% more current than the old model 48POW (48V 1.46A 70W), allowing more power per port. Co

The wAP R is a small weatherproof wireless access point with miniPCI-e slot reserved for LTE card. Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP R also has

The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office. It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet acce

RBGPOE-CON-HP serves as a converter of any 48V PoE source (passive PoE, Telecom PoE, 802.3af and 802.3at) to passive 24V PoE, for example for powering RouterBOARD devices. The PoE converter supports 10/100/1000Mbps. The maximum output power is 24W.

UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

The hEX is a small five port Gigabit ethernet router in a nice plastic case for managing your wired SOHO network. Since v3 revision router has USB port and microSD slot. The unit is equipped with a powerful 720MHz CPU, 64MB RAM, five Gigabit

The hAP ac lite is a Dual-band Access Point/Router, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time. The device is very small and will look good in any home or office, wall mounting anchor holes are pro

RBmAPL-2nD is the smallest wireless Access Point with full RouterOS support and a built-in 2.4GHz radio part with support for 802.11b/g/n standards. The whole device is barely bigger than a matchbox and a special ethernet port was used to make i

A super low loss 50cm long RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values. The name of this cable comes from combining the words “flexible” and “waveguide”

The ML-WAP-H is an improved ability to hold any MikroTik wAP unit on a 20-65mm diameter mast that allows elevation and a more stable hold than the plastic or metal strap. No drilling is required to install the MaxLink bracket on the wAP u

This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device that has SFP+ ports can now

CubeSA 60Pro ac is a complete sector antenna with a robust and easy-to-position holder, very decent dimensions, L4 licenses, 60° antenna (60 GHz), Gigabit Ethernet with support for both passive and active PoE and is suitable a

There is a completely new shielded TwistaPort adapter TPA-RBC designed for the MikroTik RouterBOARD platform. It is used to connect the RB91x, RB71x, RB4xx and RBM11 routers to the TwistPort antennas. The connection between

S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM. Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2

This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas. The device can be

SXTsq-mount is a metal, easily positionable holder for all units from the SXTsq series. It is installed on the unit using 4 screws that are included in the package. The holder can be mounted on a vertical or horizontal pipe with a diameter of

With this kit, it is possible to mount 1, 2, 3 or up to 4 MikroTik devices in a single 1U with a size of 19". It is above all a perfect use of space which is not never enough in the rack The K-79 gull ears are compatible only

The wAP ac is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch, or anywhere else where you need a capable wireless connection. wAP AC has 2x

The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11a

The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi

MikroTik netPower Lite 7R is a reverse PoE switch with 8x Gigabit ethernet ports, two SFP ports, DC power connector, DC terminal and SwOS operating system. The first 7 LAN ports allow power through PoE IN and 8th port supports PoE out

It is lightweight, easy to use, extremely durable and without any small parts that might break. Pick it up today for the price of a milkshake and enjoy simple positioning of your SXTsq devices like never before!

S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately.

TPA-SMA is a TwistPort converter adapter from TwistPort to (2) RSMA-female connectors. The adapter allows connect any two-polarized radio to be connected by RF cables. The adapter is capable of operating in the 5180 to 6400MHz band. RSMA f

Thanks to the implementation of the RB911 into the existing mANT type sector antenna, a new transmitting unit designed for ISP providers was created, ideal for connecting clients over longer distances. Inside the sector antenna is a ve

KNOT is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band and CAT-M technology. Because of the low cost, low bandwidth cellular connection, it is supp

This version of our BLE tags comes completely sealed, cast in industrial-grade molds to give it a solid IP69k ingress protection rating. In other words, this tag is dust-tight – nothing gets in, and it is fully protected against close-ran

LHG LTE18 kit is a device used to connect to a mobile 3G/LTE network. Place it outside on a pole or anywhere high enough and connect where there are no cell phones. Thanks to the large, high-gain antenna, the device can connect to transmitters e