GPON a GEPON

The Huawei OptiXstar K562 is a wireless router that perfectly complements ONT units in bridge mode or can be used as a Wi-Fi repeater with an existing Huawei wireless router. Supporting the WiFi 6 standard, the router achieves a ma

The Huawei OptiXstar K562e-10 is a wireless router that is perfect for use in combination with ONT units in bridge mode or as a Wi-Fi repeater with an existing Huawei wireless router. Supporting the WiFi 6 standard, the router achi

The Huawei OptiXstar EN8010Ts-20 is an XGS-PON bridging-type ONT in the Huawei all-optical access solution. It uses the XGS-PON technology to implement ultra-broadband access for users. Auto Port Speeds Auto-adaptive 10000Mbit/s, 50

Huawei OptiXstar EN8255X6s-8X is an XGS-PON and Wi-Fi 6 routing-type ONT. It uses the XGS-PON and Wi-Fi 6 technologies to implement ultra-broadband access, high performance and wide coverage for users. The high forwarding performan

The Huawei OptiXstar EN8245X6s-8N is an intelligent ONT router utilizing XGS-PON and Wi-Fi 6 technologies. It provides ultra-broadband access, high performance, and extensive coverage. The device offers 1x 2.5 Gbit and 3x

The Huawei OptiXstar EG8041X6-10 is a GPON ONT Gateway with support for Wi-Fi 6 (802.11 a/b/g/n/ac/ax) and a maximum transmission speed of 2402 Mb/s on 5 GHz and 574 Mb/s on 2.4 GHz. The ONT unit is equipped with four LAN

DS-P7500-08 is a GPON OLT unit offering 8 XGS-PON/GPON ports, allowing you to connect up to 256 clients per port for XGS-PON or 128 clients per port for GPON, for a total of up to 2048 clients for XGS-PON or 1024 clients for GPO

TP-Link DS-P8000-X2 is a 2U chassis that can be equipped with up to two separately sold service boards, providing up to 32 PON ports. The flexibility of installing service boards allows the device to be adapted to all requirements. The ch

PSU Replacement for TP-Link DS-P8000-X2, dual AC+DC power supply, hot-swap capability and 4KV surge protection.

Service board for DS-P8000-X2 and DS-P8000-X7 chassis, expanding the chassis with 16 GPON ports offering speeds of up to 2.488 Gbps downstream and 1.244 Gbps upstream per port. Supports a split ratio of 1:128 for GPON. Compatible with TP-Link's

Service board for DS-P8000-X2 and DS-P8000-X7 chassis, expanding the chassis with 8 GPON ports offering speeds of up to 2.488 Gbps downstream and 1.244 Gbps upstream per port. Supports a split ratio of 1:128 for GPON. Compatible with TP-Link's C

DS-P7001-01 is a GPON OLT unit with one GPON port supporting up to 128 clients (ONT units) with physical links reaching distances of up to 60 km. It features 1x SFP+ and 1x 2.5 Gigabit Ethernet as uplink, 1 Gigabit Ethernet for man

TP-Link XGS-PON/XG-PON/GPON SFP+ module DS-PMA-Combo C+ is designed for slots in TP-Link OLT units. It is a C+ class module, terminated with an SC connector with UPC polishing, and has a range of up to 20km. The module has different characteris

TP-Link GPON SFP module DS-PMA-C++ is designed for GPON slots in TP-Link OLT units. It is a special SFP module with an asymmetric speed of 2.5Gbps upload and 1.25Gbps download towards clients. The GPON SFP module is termi

TP-Link XGZ030 XGS-PON terminal is ONU unit with mode bridge which delivers 10 Gbps upstream and downstream transmissions simultaneously. Terminal is equiped with SC/APC XGS-PON port and 10Gb/s LAN port. Supports the OMCI (O

The Huawei OptiXstar EG8145B7N-50 is a GPON ONT device with support for Wi-Fi 7. It offers: 1x SC/APC uplink connector, 1x 2.5 GE and 3x GE ports, 1x POTS port, and 1x USB port. Support for Wi-Fi 7 (2.4 GHz and 5 GHz with

The Huawei OptiXstar K572 is a wireless router ideal for use with an ONT terminal, providing sufficient coverage and a stable wireless signal. It offers: 1x 2.5 GE port for connection to the service provider’s network. 1

Product description prepares.

UFiber GPON SFP modul with PN: UF-GP-B+ is designed to GPON slots in OLT unit from Ubiquiti. It is a special SFP module with asymmetric speed 2,5Gbps upload, 1,25Gbps download in direction to clients. GPON SFP module has SC connector with UPC

UF-NANO is a compact and at the same time robustly built GPON terminal element with an LED display for displaying the current throughput / IP address and the status of the Ethernet and optical line. The speed of the PON line is maximum (Rx/Tx) 2.488 /

UFiber OLT 8 offering 8 GPON ports with support up to 128 clients per port, overall up to 1024 concurrent clients with physical fibers up to 20 km. UF-OLT-8 has 8 GPON port,

UFiber GPON SFP modul with PN: UF-GP-C+ is designed to GPON slots in OLT unit from Ubiquiti. It is a special SFP module with asymmetric speed 2,5Gbps upload, 1,25Gbps download in direction to clients. GPON SFP module has SC connector with UPC

Modern, elegant industrial design, robust design and high performance - this is U Fiber Loco, a CPE unit for GPON solutions. Device status information Compared to version UF-NANO on this unit lacks an information LED display, inst

UFiber OLT 4 offering 4 GPON ports with support up to 128 clients per port, overall up to 512 concurrent clients with physical fibers up to 20 km. UF-OLT-4 has 4 GPON port and

Modern, elegant industrial design, robust design and high performance - this is U Fiber Loco, a CPE unit for GPON solutions. Device status information Compared to version UF-NANO on this unit lacks an information LED display, inst

Modern, elegant industrial design, robust design and high performance - this is U Fiber Loco, a CPE unit for GPON solutions. Device status information Compared to version UF-NANO on this unit lacks an information LED display, inst

PLC optical splitters are most important things for building FTTx network with P2MP type (Point to Multi-Point). Our offering splitters have very low loss and high return loss. Compact size provide very easy install to cabinets and optical patch panels

PLC optical splitters are most important things for building FTTx network with P2MP type (Point to Multi-Point). Our offering splitters have very low loss and high return loss. Compact size provide very easy install to cabinets and optical patch panels

PLC optical splitters are most important things for building FTTx network with P2MP type (Point to Multi-Point). Our offering splitters have very low loss and high return loss. Compact size provide very easy install to cabinets and optical patch panels

PLC optical splitters are most important things for building FTTx network with P2MP type (Point to Multi-Point). Our offering splitters have very low loss and high return loss. Compact size provide very easy install to cabinets and optical patch panels