PoE power

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

MaxLink MAXPI15FE is a very simple 100Mbps PoE injector with one output POE port to power devices with 802.3af support with maximum consumption up to 24W, output voltage 48V and current 0.5A. The ma

PSBT-6-4P-250 is a 6 port 10/100Mbps PoE switch without management. Automatically detects and powers devices supporting PoE standard 802.3af/at (max. 30 W/port) on ports 1 to 4, on port 1 even supports PoE standard 802.3bt (60 W).

MaxLink PI30 is Gigabit PoE injector of white color with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. Po

PSBT-10-8P-250 is a 10 port 10/100Mbps PoE switch without management. Automatically detects and powers devices supporting PoE standard 802.3af/at (max. 30 W port) on ports 1 to 8, on port 1 it even supports PoE standard 802.3bt (60

MaxLink PI15S is high quality Gbit POE injector with 1 POE Out eth port for devices which support 802.3af. It provides 15,4W. Plug injector directly to socket. Powering through 4,5(+) and 7,8(-). It is suitable especially for IP cams, VOIP phone

MaxLink MAXPIDIN60 is an active DIN rail mounting PoE injector with DC power input from 12 to 48 V and built in power converter. The output of this power supply is 1Gbit port with support of the 802.3af/at (55 V) which is dedicated for Wi

MaxLink PI60-10G is a high-quality 10-Gigabit PoE injector with a single output PoE port for powering devices that support 802.3af/at standards with a maximum power consumption of up to 60W. To ensure better distribution of the current load, power is s

MaxLink PI60 2x2 is a dual-port PoE injector designed for indoor use. It provides 55 VDC power for remote PDs through one PoE port or delivers 30W per port for two remote PDs simultaneously. It powers terminal devices that support the IEEE802.3af/at st

MaxLink PI60 EXT 1x2 is an industrial PoE extender with three 10/100/1000 Mbps ports, 1x PoE-in port supporting 802.3bt/PoE++ with a power output of 60W or higher, up to a maximum of 95W and 2x PoE-out ports providing up to 30W each with

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

The MaxLink PI60 EXT 1x4 is a Gigabit PoE extender equipped with 1x input LAN port supporting PoE-IN and 4x output PoE-OUT ports supporting 802.3af/at. The total PoE-OUT budget of the extender is 65W. To power the extender via the PoE-IN port, y

MaxLink MAXPIDIN60F is an active DIN rail mounting PoE injector with DC power input from 12 to 57 V and built in power converter. Injector has one POE LAN port output and one SFP port output. The output of this power supply is 1Gbit port with su

MaxLink PI15W is a high quality Gigabit POE injector with PoE output port for powering 802.3af-enabled devices with a maximum power consumption of up to 15.4W. The power supply is conducted on wires 4.5 (+) and 7.8 (-). The power injector is esp

MaxLink PI30F is a high-quality Gigabit POE injector with a single POE port, LAN port and one SFP port for powering 802.3af/at devices with maximum power consumption up to 30W. For better distribution of current load, power is applied to

MaxLink PI90 is a high-quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 95W. For better distribution of the current load, all 4 pairs of conductors are powered. Can als

MaxLink PI60 is a high quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 60W. For better current load distribution, all 4 pairs of conductors are powered. The

MaxLink MAXPIDIN30 is an active PoE injector with DIN rail mounting with input DC power supply 12 to 48V. The output of this power source is a Gigabit port with 802.3af/at PoE (55V) designed for WiFi, VoIP or wireless links. PoE is distri