Teltonika

Combo antenna with a total of three 3m cables, terminated with 2x SMA Male and 1x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated wit

Surface mounting kit PR5MEC12, Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

GNSS ADHESIVE SMA ANTENNA for the band of 1575.42-1602 MHz and 2 dBi gain, 3m cable lenght, type of mounting - adhesive. Recommended for RUT955/RUTX09/RUTX11/TRB245

TRB255 is an industrial Gateway equipped with a number of Input/Output, Serial, Ethernet ports and LPWAN modem. With backwards compatibility to EGPRS (2G) network, legacy industrial devices can be upgraded for extended use and support of LTE Cat

Small and durable industrial LTE Cat 4 Gateway equipped with a number of Input/Output, Serial, Ethernet ports. Number of features makes this Gateway perfect in application where legacy and modern industrial equipment must be integrated

Beacon with battery life reaching up to 18 years, identifies and tracks industrial equipment within a radius of 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Beacon with battery life reaching up to 5 years, identifies and tracks industrial equipment within a radius of 200 meters. To be used with: RUTX11, RUTX12, RUTX10.

Compact beacon enables localization and automated inventory management within 300 meters radius. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring temperature sensitive equipment within 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring heat-sensitive goods within 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring temperature sensitive equipment within 200 meters. To be used with: RUTX11, RUTX12, RUTX10.

Wireless motion sensor that detects vibration levels to trigger the alerts or automated commands. To be used with: RUTX11, RUTX12, RUTX10.

Robust wireless sensor automatically detects magnetic contact loss or valves opening within 500 meters radius. To be used with: RUTX11, RUTX12, RUTX10.

Wireless motion sensor that detects vibration levels to trigger the alerts or automated commands. To be used with: RUTX11, RUTX12, RUTX10.

Power supply 12V, 20W, mounted directly on the DIN rail. Input voltage 100-240 VAC 50/60 Hz

RUTX12 is a robust industrial LTE Advanced (LTE-A) router equipped with Load Balancing via two LTE modems, Dual-SIM, 4x Gigabit Ethernet ports, WiFi, GPS, Bluetooth, a powerful CPU and RutOS software for advanced networking solutions.

Bluetooth magnetic sensors are small signal transmitters with configurable signal strength and time intervals for sending data. The sensor uses advanced Bluetooth 4.0 LE technology for long-distance data acquisition and can operate for up to 2.5 years

Teltonika PR2VM20M SMA is cable extension with lenght of 2000 mm with SMA connectors (female a male).

2×3 PIN connector is primary intended for Teltonika products RUT955, RUT956 and TRB145. The connector contains total of 6 holes for cables with a cross-section of 16 to 24 AWG.

DIN rail switch Teltonika TSW304 is an industrial uncontrolled switch for centralizing your resources. It is equipped with 4× Gigabit LAN ports with a download/send speed of up to 1000 Mb/s. The durable, robust aluminum housing with rear DIN rail mo

TSW101 is an industrial POE Switch from Teltonika Networks with aluminum body, passive cooling, without management and after buying the kit it is possible to install the switch on the DIN bar. The device offers 5 LAN ports with a spee

TRB143 je ethernetová IoT gateway s podporou sítí 4G/LTE Cat4 (až 150Mbps). Průmyslová brána vyniká nízkou spotřebou energie a vysokou spolehlivostí i v kritických aplikacích. Rozhraní M-BUS a Linuxové prostředí poskytují široké možnosti přizpůsobení. ...

TSW200 is an industrial PoE switch from Teltonika Networks with an aluminum body, passive cooling, without management, and after purchasing an extra kit, the switch can also be installed on a DIN rail. The device offers 2 SFP ports wi

LTE Antenna Teltonika PR1KCL28 - SMA. Combo mobile / GNSS roof antenna with IP67 protection, which includes 4x LTE antenna cables and one GPS. Interface: 1× RG174 (GNSS), 4× RG174 (LTE MIMO).

Teltonika PR320EUA is power supply with power of 250 W. This power supply could be used with Teltonika devices: TSW200, TWS202 and TSW212. Technical data Input frequency: 50 / 60 Hz Input current: 3,9

Teltonika PR3PREU6 is power supply with power of 9 W. This power supply could be used with Teltonika devices - see related products . Technical data Input

Teltonika PR5MEC26 Rack mounting KIT is produced for one product - Teltonika RUTXR1. Technical data Mounting type: 1U Rack mounting Material: Copper - Nickel Silver Alloy C7521

Licence is ONLY for 1 device and period of time 3 years. With Teltonika Remote Management System (RMS) is possible to do remote management and monitoring for all Teltonika network devices including routers RUT2XX, RUT8XX

Licence is ONLY for 1 device and period of time 5 years. With Teltonika Remote Management System (RMS) is possible to do remote management and monitoring for all Teltonika network devices including routers RUT2XX, RUT8XX

Use the PR5MEC22 Surface Clip Holder Kit to provide a stable and secure base for your Teltonika router (RUT200, RUT240, RUT241, RUT260, TRB245, TRB246, TRB255 and TRB256). This holder kit comes with a high-quality surface clip that