Accessories

2×3 PIN connector is primary intended for Teltonika products RUT955, RUT956 and TRB145. The connector contains total of 6 holes for cables with a cross-section of 16 to 24 AWG.

DIN Rail adapter PR5MEC00 Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

LTE antenna with 2.5dBi gain and two 3m cables terminated with SMA Male connectors for 698-960 MHz and 1710-2690 MHz bands. The antenna is suitable not only for all Teltonika routers that are equipped with SMA connectors for connecting an exter

Teltonika 2m power supply cable terminated at one end with a 4-pin connector and at the other end with a screw terminal block. The cable is primarily intended for powering the following Teltonika devices: RUT230

Compact plastic DIN Rail adapter (70x25x14,5mm) PR5MEC11, Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Teltonika PR5MEC23 DIN Rail KIT adapter is possible to use almost with all Teltonika products, please see Related products and Datasheet. Technical data Mounting type: 35 mm DIN Rail Material: B

Mobile SMA Antenna for the bands of 698-960/1710-2690 MHz and 3 dBi max. gain, type of mounting - screw on. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

WiFi magnetic RP-SMA Antenna for the frequency of 2.4-2.4835 GHz and 2 dBi gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955.

Power supply 12V, 20W, mounted directly on the DIN rail. Input voltage 100-240 VAC 50/60 Hz

Teltonika PR3PREU6 is power supply with power of 9 W. This power supply could be used with Teltonika devices - see related products . Technical data Input

Teltonika PR318EUA is power supply with power of 130 W. This power supply could be used with Teltonika devices: TSW200, TWS202 and TSW212. Technical data

Teltonika PR5MEC19 SIM Card Adapter Kit is suitable for every Teltonika device with SIM card slot. Technical Data Cardboard material: Kraft eco - friendly SIM needle material: Stainless steel

Teltonika 035R-00143 is a special power adapter with atypical 4-pin connector designed for Teltonika RUT 230/240/850/900/950/955 units, or newer. The power adapter has a maximum power of 9W, an output voltage of 9V and a current of 1A.

AUTOMOTIVE POWER SUPPLY, 9-30VDC, 2A, dedicated for Teltonika products (RUT 230/240/850/900/950/955, RUTX08/09/10/11/, TRB140/141/142/145)

Teltonika PR1KC640 5G combo MIMO mobile/GNSS/Wi-Fi roof SMA antenna. Comes with 4x SMA (5G), SMA (GNSS), 2 x SMA (WiFi). Antenna is compatible with RUTX50 and TRB500. Operation frequencies: 5G: 617 - 960, 1710 - 2690,

Teltonika PR2VM20M SMA is cable extension with lenght of 2000 mm with SMA connectors (female a male).

Outdoor LTE/Wi-Fi antenna for RUT2xx series routers. Key features IP67 - Water and dust-resistant for ultimate outdoor reliability OMNIDIRECTIONAL - Designed for reliable signal coverage from every dir

Outdoor LTE/Wi-Fi/GPS antenna for RUT9-series routers. Key features IP67 - Water and dust-resistant for ultimate outdoor reliability OMNIDIRECTIONAL - Designed for reliable signal coverage from every d

Single port Gigabit PoE injector for powering devices. Key features Input frequency - 50 / 60 Hz Input current - 0.5 A PoE output voltage - 52 VDC PoE method - Active

Passive PoE injector (24W) for powering devices. Key features Input frequency - 50 / 60 Hz Input current - 0.8 A PoE output voltage - 24 VDC PoE method - Passive

Outdoor LTE/Wi-Fi/GPS/Bluetooth antenna for RUTX11 router. Key features IP67 - Water and dust-resistant for ultimate outdoor reliability OMNIDIRECTIONAL - Designed for reliable signal coverage from eve

Mobile magnetic SMA Antenna for the bands of 699-868MHz, 1850-2690MHz and 2 dBi max. gain, 3m cable lenght, type of mounting - magnetic. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB1

Surface mounting kit PR5MEC12, Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Combo antenna with a total of five 3m cables, terminated with 3x SMA Male and 2x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated with

Combo antenna with a total of three 3m cables, terminated with 2x SMA Male and 1x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated wit

WiFi magnetic RP-SMA Antenna for the frequency of 2400-2483.5/5150-5905 MHz and 3 dBi max. gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for RUTX10 and RUTX11.

GNSS ADHESIVE SMA ANTENNA for the band of 1575.42-1602 MHz and 2 dBi gain, 3m cable lenght, type of mounting - adhesive. Recommended for RUT955/RUTX09/RUTX11/TRB245

Mobile adhesive SMA Antenna for the bands of 824-960/1710-2170 MHz and 2 dBi max. gain, 3m cable lenght, type of mounting - adhesive. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TR

Beacon with battery life reaching up to 18 years, identifies and tracks industrial equipment within a radius of 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Beacon with battery life reaching up to 5 years, identifies and tracks industrial equipment within a radius of 200 meters. To be used with: RUTX11, RUTX12, RUTX10.