Mounting brackets

UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

The Universal Arm Bracket is designed for convenient wall or pole mounting of the NanoStation®M. 90° tilt adjustment allows for easy positioning.

Toolless Quick-Mounts for Ubiquiti CPE Products. Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design. Features No tools r

Excellent plastic holder designed to places where it is not possible to drill through the suction cup so it can be mounted on the window. The holder can be locked in all directions.

Magnetic wall mount for UniFi Express and Gateway Lite devices Package contents Holder Dowels and screws

Wall mount for Unifi Access Points. It is made from plastic and weights only 160 grams. Dimensions are 200,5 x 175,1 x 31,2 mm. Compatible devices U7-Pro U7-Pro-Max

U-PRO-MP universal mounting system is more versatile than standard plastic holders and can be mounted on wall or plastic boxes of different sizes in the wall. The system is compatible with these drives: UAP-AC-PRO UAP-AC-HD

The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

Magnetic wall mount for Cloud Gateway Max, Cloud Gateway Ultra, and Gateway Max.

The plastic mounting box is intended for covering the cables and attaching the wall-mounted WiFi AP EAP235 and EAP615-Wall from TP-Link to the wall using two screws. The holder is made of PETG material on a 3D printer, it is white in color

Plastový držák je určený pro uchycení bezdrátových jednotek HALO H70X a HALO H80X značky MERCUSYS na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 135 x 116 x 40mm.

The holder is designed to attach TP-Link Deco X20, Deco X50 and X60 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer and the colour is white.

The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

The plastic holder/stand is designed to mount selected TP-Link EAP products (see below) on a table or wall. 3 holes are made in the base measuring 83 × 100 mm to attach the bracket to the wall. The overall dimensions of the holder are

The plastic wall mount is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Lite, UAP-nanoHD and UAP-AC-Lite. The holder is attached to the wall using two screws

The plastic wall holder is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Pro and UAP-AC-PRO. The holder is attached to the wall using two screws and dowels, which are in

Excellent plastic holder designed for places where it is not possible to drill, so thanks to the suction cup it can be mounted from the inside of the window. The bracket is compatible with NBE-5AC-16 and NBE-M5-16.

The holder is designed for attaching TP-Link Deco M5 and P7 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.

The plastic holder is designed to hold selected MikroTik products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

The elegant aluminum stand with non-slip feet is only for the Cloud Key G2 Plus from Ubiquiti, which will hold the controller in an upright position. The dimensions of the base are 134 x 72 mm.

The holder is designed for attaching TP-Link Deco M9 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.

The holder is designed to attach TP-Link Deco E4 and M4 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer in a white colour.

Twin Horn Bracket allows you to install two symmetrical Horn antennas with exactly the same alignment. The bracket also accommodates mainstream 4x4 radios, such as ePMP™ 3000 or Mimosa® A5c. High density sectors or 4x4 deployments are now ingeniously s

Plastic holder manufactured using 3D printing technology with PETG material, designed for mounting the Deco BE25 unit on the wall or ceiling, with three screw holes.

Plastic holder, designed to cover cables and mount the Tapo C501GW camera on the wall using 4 screws (not included in the package). Manufactured using 3D printing with PETG material.

Plastic holder, 3D-printed using PETG material. Compatible with TP-Link EAP access points. 610 613 620 HD 650 653 660 HD 670 670 v2

Pole adapter with 60-130mm diameter for holders D-TC3x, TC5x, D-VIGIC34x, 4x and 540V-C. The adapter is made of PETG material on a 3D printer in a white colour.

Product description prepares.

The Ubiquiti U7 Pro Wall Table Stand is an elegant and very light table stand for the Ubiquiti U7 Pro Wall device.

The holder is designed for attaching TP-Link DECO BE65 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.