Accessories
UbiBracket universal adjustable bracket for wall or pole for all Loco and NanoStation
UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.
RJ45 Waterproof kit cable gland
RJ45 Waterproof kit is a cable gland Ethernet kit for separating indoor and outdoor cabling when mounting in any mounting box. On the outside there is a keystone with an RJ45 connector and on the inside there is a 20cm FTP cable with a shielded TP cabl
Ubiquiti Universal antenna holder for all NanoStation and LocoStation
The Universal Arm Bracket is designed for convenient wall or pole mounting of the NanoStation®M. 90° tilt adjustment allows for easy positioning.
Ubiquiti U-PRO-MP - Versatile mounting system for UAP-AC-PRO, UAP-AC-HD, UAP-AC-SHD, and above
U-PRO-MP universal mounting system is more versatile than standard plastic holders and can be mounted on wall or plastic boxes of different sizes in the wall. The system is compatible with these drives: UAP-AC-PRO UAP-AC-HD
Ubiquiti UACC-Lite-AP-AM - Wallmount for U6-Lite, UAP-nanoHD and a UAP-AC-Lite
The plastic wall mount is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Lite, UAP-nanoHD and UAP-AC-Lite. The holder is attached to the wall using two screws
Ubiquiti window or wall holder for NanoStation
Excellent plastic holder designed to places where it is not possible to drill through the suction cup so it can be mounted on the window. The holder can be locked in all directions.
Ubiquiti WM-W, WiFiMan Wizard spectrum analyzer
WiFiMan Wizard is a portable spectral analyzer designed for the WiFiMan iOS and Android mobile application with which it communicates wirelessly via Bluetooth. Together with a Lidar-equipped smartphone, it is able to project t
TP-Link D-X20/X60 Wallmount holder for DECO X20/X50/X60, white
The holder is designed to attach TP-Link Deco X20, Deco X50 and X60 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer and the colour is white.
Ubiquiti U7 Pro Wall Table Stand
The Ubiquiti U7 Pro Wall Table Stand is an elegant and very light table stand for the Ubiquiti U7 Pro Wall device.
Ubiquiti UACC-U7-Cover, paintable cover for U7-Pro
Protective cover for the U7 Pro that can be painted for a custom appearance. Compatible coloring materials Spray can (Krylon/Telox) Acrylic color Pos
Ubiquiti case for UAP nanoHD, U6 Lite a U6+, Fabric Design, 3-Pack
nHD-cover-Fabric-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Fabric design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE
Turris Omnia 5G Kit
Introducing the Turris Omnia 5G Kit At Turris, we are always looking for ways to empower our users with the latest technology, and we're excited to announce our latest upgrade: the Turris Omnia 5G Kit! This new kit will allow you to unlo
Ubiquiti nanoHD RetroFit Mount kit, 3-pack
NanoHD-RetroFit-3 is a mounting kit for attaching the UAP-nanoHD unit to the wall or ceiling with the original UAP, UAP-LR mounts. Once mounted, your UAP-nanoHD, U6 Lite or U6+ will blend in with the walls because the Retrofit Mount kit elimina
TP-Link D-M4/E4 Wallmount holder for DECO M3/M4/E4/P9, white
The holder is designed to attach TP-Link Deco E4 and M4 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer in a white colour.
Ubiquiti UACC-FM - wall mount for UX and UXG-Lite
Magnetic wall mount for UniFi Express and Gateway Lite devices Package contents Holder Dowels and screws
TP-LINK wall mount DECO BE65 white
The holder is designed for attaching TP-Link DECO BE65 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.
Ubiquiti PAK-620 Precision Alignment Kit, for RD-5G30-LW, AF-5G30-S45, PBE-5AC-620, PBE-M5-620
Precision Alignment Kit to better attach the antenna. Precision two-axis alignment enhances beam directivity for maximum PtP or backhaul performance. Applies to the following models airFiber®AF-5G30-S45 PowerBeam ™
Ubiquiti case for UAP nanoHD, U6 Lite a U6+, Concrete Design, 3-Pack
nHD-cover-Concrete-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Concrete design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-
Ubiquiti UACC-U7-Pro-Wall-Cover - Paintable cover
Wall cover for U7-Pro-Wall, which can be painted to customize its appearance.
TP-LINK DIN rail holder for SG108xx/SF1006P/ER605/RP108GE
The holder is designed for attaching TP-Link switches to a DIN rail holder. It is made of PETG material on a 3D printer in a grey anthracite color. Dimensions: 101x25mm Compatible products: SG108xx, SF1006P, ER605, RP1
Ubiquiti UACC-U7-Pro-Wall-FM, paintable flush mount
Ubiquiti U7 Pro Wall Paintable Flush Mount is a thoughtfully designed mount that allows you to hide the device directly in the wall. You then attach a cover that can be painted with any color, allowing it to blend seamlessly with any design.
Ubiquiti AirFiber AF-MPX4 airFiber Multiplexer 4x4
Precise GPS Synchronization Using a common GPS timing reference, the airFiber X radios work cohesively to deliver powerful, multi-Gigabit bridging performance for PtP links. 4x4 M
Ubiquiti UACC-Pro-AP-AM - Wall mount for U6-Pro and UAP-AC-PRO
The plastic wall holder is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Pro and UAP-AC-PRO. The holder is attached to the wall using two screws and dowels, which are in
Turris Omnia heatsink for LTE modem
Turris Omnia cooler for LTE modem. The cooler is equipped with a self-adhesive heat-conducting layer. Mounting the passive cooler is done simply by gluing it directly onto the modem plate.
Turris Omnia rack mount
RTROM01-RM is a set of two metal mounts intended for mounting the Turris Omnia 2020 in a 19" rack. Due to a different mount it is not possible to use this rack mount kit also for the Turris Omnia 2019. Double-sided router mounting T
Turris Omnia Wi-Fi 6 upgrade kit
Wireless set of two pigtails terminated with u.Fl connectors, omnidirectional antennas, upper part of aluminum chassis in silver color on Turris Omnii and Dual Band WiFi 6 cards marked AW7915-NP1, miniPCI-e bus with 4× u.Fl connectors
Ubiquiti Quick-Mount for Ubiquiti CPE Products
Toolless Quick-Mounts for Ubiquiti CPE Products. Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design. Features No tools r
Ubiquiti InWall Junction Box for UAP-IW-HD, 25-pack
Plastic inwall juction box is suitable for installation of UniFi AP In Wall HD (UAP-IW-HD). The mounting box has several holes on the back side for attaching or inserting the Ethernet cable. The box also has 2 pillar for attach UAP unit. The
Ubiquiti 60G-PM Precision Alignment Mount for AF60 and GBE-LR
The 60 GHz Precision Alignment Mount enhances mounting flexibility and device alignment. It features an easy-to-use design that requires only an Allen wrench (included) to align.
Jirous GentleKLIP par+pigtails holder of the active element to the dish with pigtails R-SMA/R-SMA
Snadno použitelný držák Ubiquiti přístupového bodu Rocket nebo jiného zařízení se stejným systémem naklapnutí. Lze montovat na stěnu nebo jinou plochu pomocí 3 - 4 šroubů (součást balení). V balení dále naleznete 2x pigtail (RSMA-male - RSMA-male). Mon...