Mounting boxes and brackets

Adaptér pro montáž kamery na sloup o průměru 67 - 127mm z hliníku a širokou podporou kamer. Součástí balení jsou i 3 kovové stahovací pásky. Kompatibilní s kamerami Uniview; IPC23xx OEM; IPC23xx; IPC22x; IPC74x; IPC252; IPC26x;

Uniview TR-JB05-B-IN-BLACK is a mounting box on the wall or ceiling, intended for bullet IP cameras of the IPC21xx series with a round base. The mounting box is made of aluminum alloy, it is covered with black color, there are

Univew TR-WM03-B-IN 3-inch fixed dome mount. Compatible with the cameras series IPC32X and IPC361X.

Uniview TR-JB03-I-IN-BLACK is a mounting bracket for the wall or ceiling, designed for Turret camera models of the IPC36xxL and IPCT1xx series. The mounting box is made of aluminum alloy and is covered in black paint. On one of

Holder for Uniview PTZ Dome cameras with ceiling mounting, length 200 mm, for outdoor and indoor use. You need to purchase the TR-UF45-A-IN adapter to attach the holder. The mount is compatible with the IPC68xx, IPC62xx and IPC63xx seri

Holder for Uniview bullet cameras from the IPC21x, IPC22x, IPC23x, IPC24x, IPC252, IPC26x and IPC74x series designed for mounting on a pipe, mast or pole.

Uniview TR-JB07-D-IN is a wall or ceiling cable junction box designed for IP cameras of the IPC2222, IPC23x, IPC24x, IPC252, IPC26x and IPC74x series. The junction box is made of aluminum alloy. It is covered with white paint and there are two holes fo

Uniview TR-JB03-H-IN is a metal mounting box on the wall or ceiling, designed for DOME camera models of the IPC363x, IPC363x SS/SA/SB, IPC64xx, IPC353x, IPC361X S/E and fisheye 814/815 series. The mounting box is made of aluminum alloy

Uniview TR-JB05-b-IN is a wall or ceiling cable junction box designed for IP cameras of the IPC21xx series with a circular base. The junction box is made of aluminum alloy. It is covered with white paint and there are holes for cables on the dow

Uniview TR-JB03-I-IN is a wall or ceiling fixed dome junction box designed for Turret cameras IPC361xL series. The junction box is made from aluminum alloy and is covered with white color. On one side there is one cable gland TR-A01-IN intended

Uniview TR-JB03-G-IN is a wall or ceiling junction box designed for DOME camera models like IPC32x, IPC31x and IPCD1XX series. The mounting box is made of aluminum alloy and is covered with white color. This mounting box is prepared for the so-called p

Uniview TR-JB04-C-IN is a wall or ceiling junction box designed for DOME camera models like IPC32x. The mounting box is made of aluminum alloy and is covered with white color. This mounting box is prepared for the so-called pendant mount, ie. pole moun

Uniview TR-JB05-A-IN is a square mounting box on the wall or ceiling, intended for bullet-type IP cameras of the IPC21xx series. The mounting box is made of aluminum alloy, covered in white paint and has a hole for c

TR-UF45-A-IN Uniview adapter for ceiling bracket PTZ dome cameras Uniview for indoor use. Suitable for TR-SE45-IN and TR-SE45-A-IN bracket.

Holder for Uniview PTZ Dome cameras with ceiling mounting, designed for outdoor and indoor use. The bracket supports these IPC68x, IPC62xx, IPC323x, IPC32xS/E/L, IPC868 and IPC814 camera series. The holder can be used directly without an adapter

Uniview TR-JB07 / WM04-B-IN is a wall mount designed for DOME models of IPC323x series cameras. The wall mount is made of aluminum alloy and is covered with white paint. On the bottom there are 2 holes with blanking plugs for cable glands TR-A01

Uniview TR-WM04-IN is a fixed indoor wall mount designed for DOME cameras IPC323x series. The wall mount is made of aluminum alloy and its covered with white color.

TR-A01-IN is a waterproof and dustproof cable gland suitable for many plastic and metal cable boxes and holders from Uniview. It is an optional accessory for data and power cables with a maximum diameter of 13 mm.

Uniview TR-WE45-IN is a wall mounting bracket designed for PTZ dome cameras of the IPC6222, IPC62xx and IPC63xx series. The mounting box is made of aluminum alloy, it is covered with white paint.

Adapter for mounting the Uniview PTZ dome camera holder on a pole, pipe or pole. Can only be used in combination with the TR-WE45-IN wall mount. The mount is specifically designed for IPC62xx, IPC63xx and IPC68x series PTZ dome cameras.

Holder for attaching Uniview cameras to the outer corner. Can only be used in combination with the TR-WE45-IN wall mount. The holder is designed for PTZ dome cameras of the IPC62xx, IPC63xx and IPC68x series.

Uniview TR-JB07/WM03-A-IN is a 3-inch fixed dome outdoor wall mount for camera models series IPC32X, IPC361X and IPC363X series. The wall mount is made of aluminum alloy and is covered in white paint.

Uniview 3-inch fixed dome wall mount for camera series IPC361x, IPC363x. With extra back outlet.

Adapter for mounting the camera holder on a mast, pipe or pole, or for cameras series PC32x, 323x, 361x, 8xx. Compatible with holders or boxes TR-WM03-C-IN TR-WM03-B-IN TR-JB07-B-IN TR-J

Uniview TR-JB07/WM03-G-IN is an outdoor wall mount with a extra back outlet, which has two holes on the bottom side for 3/4" cable glands TR-A01-IN. The wall mount with box is designed for Turret cameras IPC361xL, IPCD1xx and IP

Uniview TR-WM04-IN is a wall mount bracket designed for DOME camera models of IPC361xL series. The mounting bracket is made from aluminum alloy and is covered with white color.

Uniview TR-JB07/WM03-F-IN je montážní držák na stěnu s malým boxem na kabely, který má na spodní straně dva otvory pro 3/4" kabelové průchodky TR-A01-IN. Držák na střenu s boxem je určený pro kamery řady IPC363x , IPC36xxS/E a mini PTZ IPC641x , je vyr...

Uniview TR-SE24-IN je stropní přídavná tyč k odsazení od stropu o dalších 220mm. Držák je vyroben z hliníkového materiálu, je pokryt bílou barvou a je potřeba jej kombinovat s držákem na strop TR-CM24-IN . Prodloužení je kompatibilní s Uniview kamerami...

Uniview TR-SE24-A-IN je stropní přídavná tyč k odsazení od stropu o dalších 520mm. Držák je vyroben z hliníkového materiálu, je pokryt bílou barvou a je potřeba jej kombinovat s držákem na strop TR-CM24-IN . Prodloužení je kompatibilní s Uniview kamera...

Uniview TR-CM24-IN je stropní držák sloužící k oddálení instalované montážní krabičky (určenou pro kameru) od stropu. Držák je vyroben z hliníkového materiálu, je pokryt bílou barvou, délkou odsazení 22,35cm a je kompatibilní s Uniview kamerami IPC323x...