Accessories
UbiBracket universal adjustable bracket for wall or pole for all Loco and NanoStation
UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.
Ubiquiti Universal antenna holder for all NanoStation and LocoStation
The Universal Arm Bracket is designed for convenient wall or pole mounting of the NanoStation®M. 90° tilt adjustment allows for easy positioning.
TP-Link D-TP100 Rackmount holder for OC200/SF1005xx/SG105xx/SG1005xx, gray
The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime
Ubiquiti airFiber OMT RD Conversion Kit, Slant 45
The 5 GHz RocketDish to airFiber® Antenna Conversion Kit, model AF-5G-OMT-S45, converts the RocketDish RD-5G30 or RD-5G34 antenna for use with the airFiber AF-5X radio.
Ubiquiti UACC-U7-Cover, paintable cover for U7-Pro
Protective cover for the U7 Pro that can be painted for a custom appearance. Compatible coloring materials Spray can (Krylon/Telox) Acrylic color Pos
Ubiquiti WM-W, WiFiMan Wizard spectrum analyzer
WiFiMan Wizard is a portable spectral analyzer designed for the WiFiMan iOS and Android mobile application with which it communicates wirelessly via Bluetooth. Together with a Lidar-equipped smartphone, it is able to project t
Turris MOX E Module - Super Ethernet (boxed version)
The MOX E module is an ideal choice if you need more ethernet ports to connect devices to your network. It has twice the width of the other modules and contains an eight-port manageable switch for gigabit ethernet. Compatibility U
TP-Link D-M5 Wallmount holder for DECO M5, white
The holder is designed for attaching TP-Link Deco M5 and P7 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.
Turris Omnia rack mount
RTROM01-RM is a set of two metal mounts intended for mounting the Turris Omnia 2020 in a 19" rack. Due to a different mount it is not possible to use this rack mount kit also for the Turris Omnia 2019. Double-sided router mounting T
Turris MOX G Module - mPCIe through (boxed version)
The MOX G module with a mPCIe slot allows you to connect a compatible Wi-Fi card to achieve significantly higher speeds than SDIO (we recommend the original mPCIe MOX Wi-Fi add-on). It also has a SIM card slot for users who are considering a mPCIe LTE
Ubiquiti Quick-Mount for Ubiquiti CPE Products
Toolless Quick-Mounts for Ubiquiti CPE Products. Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design. Features No tools r
Ubiquiti U-PRO-MP - Versatile mounting system for UAP-AC-PRO, UAP-AC-HD, UAP-AC-SHD, and above
U-PRO-MP universal mounting system is more versatile than standard plastic holders and can be mounted on wall or plastic boxes of different sizes in the wall. The system is compatible with these drives: UAP-AC-PRO UAP-AC-HD
TP-Link D-X20/X60 Wallmount holder for DECO X20/X50/X60, white
The holder is designed to attach TP-Link Deco X20, Deco X50 and X60 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer and the colour is white.
Turris mini PCIe Module, Wi-Fi 6 11ax 4T4R
The Dual Band WiFi 6 card model AW7915-NP1 features a miniPCI-e interface with 4 × u.Fl connectors, supporting WPA3 encryption and modulation speeds of 2401 Mbps in the 5 GHz band (4×4) or 574 Mbps in the 2.4 GHz band with
TP-Link D-M9 Wallmount holder for DECO M9, white
The holder is designed for attaching TP-Link Deco M9 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.
Ubiquiti UACC-CKG2-Plus Stand - Stand for Cloud Key G2 Plus
The elegant aluminum stand with non-slip feet is only for the Cloud Key G2 Plus from Ubiquiti, which will hold the controller in an upright position. The dimensions of the base are 134 x 72 mm.
RF elements Twin Horn Bracket
Twin Horn Bracket allows you to install two symmetrical Horn antennas with exactly the same alignment. The bracket also accommodates mainstream 4x4 radios, such as ePMP™ 3000 or Mimosa® A5c. High density sectors or 4x4 deployments are now ingeniously s
Turris miniPCI-e WiFi 5GHz card for MOX and Omnia
WiFi card RTROM01-WS3294 is a wireless miniPCI-e card with 4× u.Fl connectors, support for WPA2 encryption, modulation speed up to 1733 Mbps in the 5GHz band (4×4 MU -MIMO) or 600 Mbps in the 2.4GHz band (4×4 MU-MIM
D-MT750 Rackmount holder for MikroTik devices RB750Gr3, RB750r2, RB750UPr2 and RB760iGS, gray
The plastic holder is designed to hold selected MikroTik products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime
Turris MOX Wi-Fi 6 Addon (DBDC)
Wireless set of two adhesive antennas with pigtails terminated with u.Fl connectors and Dual Band WiFi 6 cards with Mediatek MT7915DAN chipset, miniPCI-e bus with 2x u.Fl connectors, supporting WPA2 encryption, modulation speed
Ubiquiti UACC-Lite-AP-AM - Wallmount for U6-Lite, UAP-nanoHD and a UAP-AC-Lite
The plastic wall mount is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Lite, UAP-nanoHD and UAP-AC-Lite. The holder is attached to the wall using two screws
Ubiquiti UACC-Pro-AP-AM - Wall mount for U6-Pro and UAP-AC-PRO
The plastic wall holder is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Pro and UAP-AC-PRO. The holder is attached to the wall using two screws and dowels, which are in
TP-Link D-EAPOUT Ceiling bracket for EAP610-Outdoor, grey
Plastový stojan pro TP-Link EAP610-Outdoor venkovní WiFi jednotku. Stojan umožňuje instalace na strop (rozměr podstavce je 83x100mm) nebo na stůl. Patice držáku umožňuje bezproblémové držení EAP jednotky, ať už je držák na stole či na stropě. Rozměry d...
TP-Link D-EAPWALL Holder/stand for EAP235-Wall. EAP615-Wall, grey antracit
Plastový stojan pro TP-Link EAP235-Wall a EAP615-Wall WiFi Access point jednotky. Stojan umožňuje instalace na stůl (rozměr podstavce je 81x120mm). Celkové rozměry stojanového držáku jsou 81 x 120 x 88 mm a je vyroben z šedého PETG fillamentu pomocí 3D...
TP-Link D-HaloX Wallmount holder for HALO H70X/H80X, white
Plastový držák je určený pro uchycení bezdrátových jednotek HALO H70X a HALO H80X značky MERCUSYS na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 135 x 116 x 40mm.
D-U6-L Wallmount holder for Ubiquiti U6-Lite, UAP-nanoHD and UAP-AC-Lite, white
The plastic holder is used for the horizontal installation of UniFi Access Points from Ubiquiti U6+, U6-Lite, UAP-nanoHD and UAP-AC-Lite on the wall or as a stand on a table. The holder can be installed with the UniFi plate up
Ubiquiti case for UAP-beaconHD and U6-Extender, Black design, 3-pack
Set of 3 rectangular covers with black theme is designed to change from the traditional white look and is compatible with UAP-beaconHD devices and U6-Extender. For demanding customers there is a tot
Ubiquiti case for UAP-beaconHD and U6-Extender, Concrete design, 3-pack
Set of 3 rectangular covers with concrete theme is designed to change from the traditional white look and is compatible with UAP-beaconHD devices and U6-Extender. For demanding customers there is a
Ubiquiti case for UAP-beaconHD and U6-Extender, Wood design, 3-pack
Set of 3 rectangular covers with wooden theme is designed to change from the traditional white look and is compatible with UAP-beaconHD devices and U6-Extender. For demanding customers there is a to
D-U6-P Wallmount holder for Ubiquiti U6-PRO and UAP-AC-PRO, white
The plastic holder is used for horizontal installation of UniFi Access Points from Ubiquiti U6-PRO and UAP-AC-PRO on the wall or as a stand on a table. The holder can be installed with the UniFi plate up and down and