Power cables and adapters

Fused at 3A, Voltage: 220-250V Max load: 600W Simple, safe and fast method of plug conversion Approved to BS5733, BS1363-5 plug/socket features and BS1362 fuse link Colour: Black

USP-Cable is a special DC power cable designed for the Ubiquiti SmartPower System. This cable connecting UniFi Switch and the UniFi SmartPower (USP-RPS) from which it will receive power if the built-in power source fails. The cable is 1.5m l

Conductor cross section 4.0 - 6.0 mm2 Material: electrolytic copper, tinned PVC insulation, with extended insulation sleeve, suitable for harmonized cables

Adapter from a two-pole terminal block to standard DC jack with size 2.1/5.5mm. Adapter is suitable for powering analog cameras or other devices without PoE technology. Just bring a two line DC cable and simply connect it to the terminal block m

PC-186-VDE power cord with VDE approval German plug power cord with VDE approval 6 ft bulk packing

Průřez vodiče 4,0 - 6,0 mm2; Materiál: elektrolytická měď, pocínovaný; PVC izolace, s rozšířenou izolační objímkou, vhodný pro harmonizované kabely

POZOR !!!; Před připojením je nutné zkontrolovat polarizaci kabelu. SPECIFIKACE; Typ konektoru: O 2.1 / 5.5 mm Třída kabelu; Připevňování vodiče: Pájení; Délka kabelu: 1.5 m; Určení: Elektrický kabel; Materiál: PET; Příklad použití: • OMY-2X0.75; • K-6...

Cable reduction with 1 power socket for connection to UPS with IEC connectors. Completely product length is 30cm.

Teltonika 2m power supply cable terminated at one end with a 4-pin connector and at the other end with a screw terminal block. The cable is primarily intended for powering the following Teltonika devices: RUT230

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

The DC link cable terminated by ears on both sides is ideal for connecting M6 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

Cable adapter with three sockets for connection to UPS with IEC connectors. Specifications Cable length 30 cm Max. operating current 10 A Nominal voltage 250 V IEC C14 plug CEE 7/5 (E)

Rozbočovací kabel napájení, konektory 1x FEMALE (samice) na 8x MALE (samec). Typ konektoru: 2.1/5.5 mm / Jednoduchá zásuvka / 8 x 2.1/5.5 mm Třída kabelu; Materiál: PET; Délka kabelu: 8 x 0.21 m; Vybrané vlastnosti: • Velmi jednoduchá a rychlá montáž; ...

The F-21-55 is a power adapter from a two-pole terminal block to a socket for a standard DC jack with a size of 2.1/5.5mm. Adapter is suitable, for example, when you need to connect an LED strip to your power adapter, which has prepared cables m

Redukce pro DC zdroje, konvertuje klasický napájecí konektor 5,5 x 2,5mm na 4x1,7mm. Redukce je vhodná například pro mini PC Orange Pi, Banana Pi, Wintel, konzole PSP, některé vnitřní kamery a chůvičky a další.

Teltonika 1.5 m power cable terminated at one end with a 4-pin connector with protection against accidental disconnection and at the other end with 4 shaved wires. The cable is primarily intended for powering these Teltonika devices -

Typ konektoru: 2.1/5.5 mm Jednoduchá zásuvka / 4 x 2.1/5.5 mm Třída kabelu; Materiál: PET; Délka kabelu: 4 x 0.21 m; Vybrané vlastnosti: • Velmi jednoduchá a rychlá montáž; Hmotnost: 0.032 kg; Rozměry (DxŠxV): 150x30x30 mm; Balení: Žádné

Redukce pro DC zdroje, konvertuje 2.1mm DC jack na 2.5mm DC plug (z 2.1mm adaptéru redukuje na 2.5mm přístroj), rovná, 180 stupňů. Redukce je vhodná například pro APU.1C1, APU.1C4, APU.1D4.

Extension Cable 5 m 6x socket

Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 1.5m long. The cable is very robust, contains 2 wires

Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 3m long. The cable is very robust, contains 2 wires w

4-pin socket with contact terminal for Teltonika devices.

Extension Cable 5 m 6x socket

Power cable 1.8 m long with angled end (connector to PC). Particularly suitable where is not space for desktop PC or switches / routers in a data rack.

Product description prepares.

Rozbočovací kabel DC napájení s konektory 2x samec (male) na 1x samice (female). Konektory mají rozměry 2.1/5.5mm a celková délka je 19cm.

Napájecí kabel WT-1L je dlouhý 11cm, je zakončený na jednom konci DC napájecím konektorem typu samec o rozměrech 2.1/5.5mm a na druhém konci zančeným svorkou/čokoládou. Kabel je vhodný např. pro nahrazení původního konektoru u zdroje.