Antenna for 2.4 GHz and 5 GHz band, 5 dBi peak gain in 2.4 GHz band. Reverse SMA connector. Dual band antennas are always a compromise, use single band antennas for best gain in a specific frequency band...

SMA female pigtails are commonly used for 3G/LTE modem antenna ports.

PC Engines apupad is a heat pad designed for the CPU or southern bridge to increase the life of your APU unit. When installing, the protective foil must be removed on both sides.

Pigtail cable u.Fl (IPEX) to RSMA female, 15cm long, designed for frequency range 0 up to 6GHz with maximum attenuation 1,5db. It is a very quality RF cable reduction from antenna to miniPCI cards.

Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 to 4 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of painted aluminum. RoHS compliant. Changes from case1c Cou

The blue color mounting box for the APU 4 series. The box includes holes for 4x LAN, 3x SMA, RS-232 serial port and 2x USB.

120 GB mSATA SSD module, Kingfast, Silicon Motion SM2258XT controller, 120GB 3D TLC flash. 120 GB modul mSATA SSD pro použití s deskami řady APU. Kapacita 120 GB; mSATA konektor; Řídicí jednotka Silicon Motion SM2258XT;

Indoor instalation box for APU Series, red colour. Enclosure with cutouts for 3x LEDs and 1x switch in front, cutouts for DB9, 4x LAN, 6x SMA connectors (2x each on the back, right and left side), DC jack in back. It is made of anodized or painted alum

The metal latch sockets on apu boards don't always latch as nicely as they should. Please make sure the latch is properly seated to avoid cards unsocketing during shipment of assembled systems. mSATA and miniPCI express slots look exactly the same, but

Use this fixture to allow easy installation of the heat spreader in a consistent location. apufix1a = heat spreader placement fixture for apu2 / apu3 / apu4 boards.

Grey mounting box designed for the ALIX.2 model line. The box contains holes for 2 x LAN, 3 x SMA, RS-232 serial port and 2 x USB.

Grey mounting box designed for the ALIX.2 model line and APU 1 / 2 / 3. The box contains holes for 3 x LAN, 1 x SMA, RS-232 serial port and 2 x USB.

Black mounting box designed for the ALIX.2 model line and APU 1 / 2 / 3. The box contains holes for 3 x LAN, 3 x SMA, RS-232 serial port and 2 x USB.

Black mounting box designed for the ALIX.2 model line. The box contains holes for 2 x LAN, 2 x SMA, RS-232 serial port and 2 x USB.

Red mounting box designed for the ALIX.2 model line and APU 1 / 2 / 3. The box contains holes for 3 x LAN, 3 x SMA, RS-232 serial port and 2 x USB.

Blue mounting box designed for the ALIX.2 model line and APU 1 / 2 / 3. The box contains holes for 3 x LAN, 3 x SMA, RS-232 serial port and 2 x USB.