Accessories

Mobile SMA Antenna for the bands of 698-960/1710-2690 MHz and 3 dBi max. gain, type of mounting - screw on. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

WiFi magnetic RP-SMA Antenna for the frequency of 2.4-2.4835 GHz and 2 dBi gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955.

WiFi magnetic RP-SMA Antenna for the frequency of 2400-2483.5/5150-5905 MHz and 3 dBi max. gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for RUTX10 and RUTX11.

GNSS ADHESIVE SMA ANTENNA for the band of 1575.42-1602 MHz and 2 dBi gain, 3m cable lenght, type of mounting - adhesive. Recommended for RUT955/RUTX09/RUTX11/TRB245

Mobile adhesive SMA Antenna for the bands of 824-960/1710-2170 MHz and 2 dBi max. gain, 3m cable lenght, type of mounting - adhesive. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TR

Beacon with battery life reaching up to 18 years, identifies and tracks industrial equipment within a radius of 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Beacon with battery life reaching up to 5 years, identifies and tracks industrial equipment within a radius of 200 meters. To be used with: RUTX11, RUTX12, RUTX10.

Compact beacon enables localization and automated inventory management within 300 meters radius. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring temperature sensitive equipment within 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring heat-sensitive goods within 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring temperature sensitive equipment within 200 meters. To be used with: RUTX11, RUTX12, RUTX10.

Wireless motion sensor that detects vibration levels to trigger the alerts or automated commands. To be used with: RUTX11, RUTX12, RUTX10.

Robust wireless sensor automatically detects magnetic contact loss or valves opening within 500 meters radius. To be used with: RUTX11, RUTX12, RUTX10.

Wireless motion sensor that detects vibration levels to trigger the alerts or automated commands. To be used with: RUTX11, RUTX12, RUTX10.

Power supply 12V, 20W, mounted directly on the DIN rail. Input voltage 100-240 VAC 50/60 Hz

Bluetooth magnetic sensors are small signal transmitters with configurable signal strength and time intervals for sending data. The sensor uses advanced Bluetooth 4.0 LE technology for long-distance data acquisition and can operate for up to 2.5 years

LTE Antenna Teltonika PR1KCL28 - SMA. Combo mobile / GNSS roof antenna with IP67 protection, which includes 4x LTE antenna cables and one GPS. Interface: 1× RG174 (GNSS), 4× RG174 (LTE MIMO).

Teltonika Bat120 is a small UPS that only works with DC voltage and hides a small 2300 mAh battery (17 Wh) for bridging short outages for Teltonika Facility with 4-pin connector. On the one hand, the input and output

2×3 PIN connector is primary intended for Teltonika products RUT955, RUT956 and TRB145. The connector contains total of 6 holes for cables with a cross-section of 16 to 24 AWG.

Teltonika PR1KC640 5G combo MIMO mobile/GNSS/Wi-Fi roof SMA antenna. Comes with 4x SMA (5G), SMA (GNSS), 2 x SMA (WiFi). Antenna is compatible with RUTX50 and TRB500. Operation frequencies: 5G: 617 - 960, 1710 - 2690,

Teltonika PR2VM20M SMA is cable extension with lenght of 2000 mm with SMA connectors (female a male).

Teltonika PR5MEC23 DIN Rail KIT adapter is possible to use almost with all Teltonika products, please see Related products and Datasheet. Technical data Mounting type: 35 mm DIN Rail Material: B

Use the PR5MEC22 Surface Clip Holder Kit to provide a stable and secure base for your Teltonika router (RUT200, RUT240, RUT241, RUT260, TRB245, TRB246, TRB255 and TRB256). This holder kit comes with a high-quality surface clip that

Teltonika PR5MEC24 TSW1 Rear panel with DIN Rail holder. This panel is compatible with Teltonika TSW100 and TSW101. Technical Data Mounting type: 35 mm DIN rail Dimensions:

Teltonika PR5MEC25 TSW2 Rear panel with DIN Rail holder is suitable for TSW200 and TSW210. Technical data Mounting type: 35 mm DIN Rai

Teltonika PR5MEC26 Rack mounting KIT is produced for one product - Teltonika RUTXR1. Technical data Mounting type: 1U Rack mounting Material: Copper - Nickel Silver Alloy C7521

Teltonika PR5MEC19 SIM Card Adapter Kit is suitable for every Teltonika device with SIM card slot. Technical Data Cardboard material: Kraft eco - friendly SIM needle material: Stainless steel

Teltonika PR4IO17K I/0 2x8pin connector Technical Data Insulation material: PA66 Contact material: Copper alloy Contact finishing: Tin-plated Wire cross section: 0.2 –

Teltonika PR5MEC15 Connectors set for devices RUT906, RUT955 and RUT956. Technical data: Voltage rating: 300 V Current rating: 8 A Withstand voltage: 1600 V/1min

Teltonika PR3P2EU3 EU power supply is for RUTX12DUAL and RUTX14. Technical Data Input frequency: 50 / 60 Hz Input current: 0.8 A Input connector: EU (Type C)