DRZACKY.CZ
TP-Link D-M4/E4 Wallmount holder for DECO M3/M4/E4/P9, white
The holder is designed to attach TP-Link Deco E4 and M4 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer in a white colour.
TP-Link D-EAPWALL-C Wallmount mounting box for EAP235 and EAP615-Wall, white
The plastic mounting box is intended for covering the cables and attaching the wall-mounted WiFi AP EAP235 and EAP615-Wall from TP-Link to the wall using two screws. The holder is made of PETG material on a 3D printer, it is white in color
TP-Link D-EAP2X Holder for EAP devices EAP225, EAP245 and EAP265, white
The plastic holder/stand is designed to mount selected TP-Link EAP products (see below) on a table or wall. 3 holes are made in the base measuring 83 × 100 mm to attach the bracket to the wall. The overall dimensions of the holder are
TP-Link D-M5 Wallmount holder for DECO M5, white
The holder is designed for attaching TP-Link Deco M5 and P7 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.
TP-Link D-TP158 Racmount holder for SG108xx/SG1006P/ER605/RP108GE, gray
The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime
D-CKG2+ Rackmount holder for UCK-G2-PLUS, gray
The plastic holder is designed to mount the UCK-G2-PLUS from Ubiquiti to 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other.
TP-Link D-EAPWALL Holder/stand for EAP235-Wall. EAP615-Wall, grey antracit
Plastový stojan pro TP-Link EAP235-Wall a EAP615-Wall WiFi Access point jednotky. Stojan umožňuje instalace na stůl (rozměr podstavce je 81x120mm). Celkové rozměry stojanového držáku jsou 81 x 120 x 88 mm a je vyroben z šedého PETG fillamentu pomocí 3D...
D-U6-L Wallmount holder for Ubiquiti U6-Lite, UAP-nanoHD and UAP-AC-Lite, white
The plastic holder is used for the horizontal installation of UniFi Access Points from Ubiquiti U6+, U6-Lite, UAP-nanoHD and UAP-AC-Lite on the wall or as a stand on a table. The holder can be installed with the UniFi plate up
TP-Link D-TP100 Rackmount holder for OC200/SF1005xx/SG105xx/SG1005xx, gray
The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime
D-MT750 Rackmount holder for MikroTik devices RB750Gr3, RB750r2, RB750UPr2 and RB760iGS, gray
The plastic holder is designed to hold selected MikroTik products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime
D-MTACX Rackmount holder for MikroTik devices hAP AC2/hAP, gray
Plastový držák je určený pro uchycení vybraných MikroTik produktů (viz níže) do 19" a 10" racku . V případě uchycení do 19" racku je možnost uchycení vpravo, vlevo nebo dvou držáků vedle sebe. Vnitřní rozměry rámečku jsou 119 x 33 mm. Kompatibilní se z...
TP-Link D-M9 Wallmount holder for DECO M9, white
The holder is designed for attaching TP-Link Deco M9 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.
TP-Link D-EAP6X Holder for EAP devices EAP650 and EAP653, grey
Plastový držák/stojan je určený pro uchycení vybraných TP-Link EAP produktů (viz níže) na stůl či zeď . Pro uchycení držáku na zeď jsou v podstavě o rozměrech 83 x 100 mm vytvořeny 3 otvory. Celkové rozměry držáku jsou 106 x 83 x 153 mm. Kompatibilní s...
TP-Link D-EAPOUT Ceiling bracket for EAP610-Outdoor, grey
Plastový stojan pro TP-Link EAP610-Outdoor venkovní WiFi jednotku. Stojan umožňuje instalace na strop (rozměr podstavce je 83x100mm) nebo na stůl. Patice držáku umožňuje bezproblémové držení EAP jednotky, ať už je držák na stole či na stropě. Rozměry d...
TP-Link D-Halo Wallmount holder for Halo H50/H30/S12/S3, white
The plastic wall mount is designed to mount Halo H50 / H30 / S12 / S3 Mesh Access Points from Mercusys. The holder is made using 3D printing, has a white color and its dimensions are 123 × 40 × 91mm.
TP-Link D-X20/X60 Wallmount holder for DECO X20/X50/X60, white
The holder is designed to attach TP-Link Deco X20, Deco X50 and X60 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer and the colour is white.
D-U6-P Wallmount holder for Ubiquiti U6-PRO and UAP-AC-PRO, white
The plastic holder is used for horizontal installation of UniFi Access Points from Ubiquiti U6-PRO and UAP-AC-PRO on the wall or as a stand on a table. The holder can be installed with the UniFi plate up and down and
TP-Link D-HX220 - Wallmount holder for HX-220/HC-200, white
Plastový držák je určený pro uchycení bezdrátových jednotek HX220 a HC220 značky TP-Link na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 110 x 140 x 40mm.
TP-Link D-TP226 - Racmount holder for TL-SG108-M2/TL-SX105/ER7206/ER7212PC, gray
Plastový držák je určený pro uchycení vybraných TP-Link produktů (viz níže) do 19" a 10" racku . V případě uchycení do 19" racku je možnost uchycení vpravo, vlevo nebo dvou držáků vedle sebe. Vnitřní rozměry rámečku jsou 226 x 131 x 35mm. Kompatibilní ...
TP-Link D-HaloX Wallmount holder for HALO H70X/H80X, white
Plastový držák je určený pro uchycení bezdrátových jednotek HALO H70X a HALO H80X značky MERCUSYS na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 135 x 116 x 40mm.
TP-Link D-TC2xx Wallmount holder for Tapo C200 and C210, white
The plastic holder is intended for attaching TP-Link cameras Tapo C200, C210 and TC70 to the wall using a single screw. The holder can be installed above and below the camera and its base fits exactly on the socket i
TP-Link D-VIGIC34X-C Mounting box for cameras VIGI C340 and C340-W, white
The plastic holder with cable cover is intended for attaching the VIGI C340 and C340-W cameras from the TP-Link brand to the wall using two screws. The holder is made of PETG material on a 3D printer, has a white color and the overall
TP-Link D-XE75 Wallmount holder for DECO XE75/XE75 Pro, white
The holder is intended for attaching selected Deco wireless Access Point units of the TP-Link brand to the wall using two screws. The holder is made of PETG material on a 3D printer and is white in color. The mount is only compatible
TP-Link D-VIGIC2X-C Mounting box with holder for cameras VIGI C220/C230/C240/C250, white
The plastic holder with a built-in box is intended for attaching TP-Link cameras VIGI C220, C230 and C240 to the wall using two screws. The holder can be installed above and below the camera and its base fits exactly
TP-Link D-VIGIC4X-C Mounting box for cameras VIGI C400/C440/C440-W, white
The plastic box for connecting cables is compatible with TP-Link cameras VIGI 400, C440 and C440-W is designed for indoor use on the wall or ceiling using two screws. The holder is made of PETG material on a 3D printer, has a
TP-LINK bracket/cable cover for VIGI C540V cameras for wall and ceiling
TP-LINK bracket with cable cover for VIGI C540V camera for wall and ceiling, white. The plastic box for connecting cables is compatible with TP-Link camera VIGI C540V and it is designed for indoor use on the wall or ceiling using fou
TP-LINK bracket with cable cover for VIGI C540 cameras for wall and ceiling, white
TP-LINK bracket with cable cover for VIGI C540 cameras for wall and ceiling, white. The plastic box for connecting cables is compatible with TP-Link camera VIGI C540 and it is designed for indoor use on the wall or ceiling using four
TP-LINK wall and ceiling mount/stand for Tapo C310/C320/C325 cameras, white with cable cover
The plastic box for connecting cables is compatible with TP-Link Tapo C310/C320WS/C325WB is designed for indoor use on the wall or ceiling using two screws. The holder is made of PETG material on a 3D printer, has a white color and the overall d
TP-LINK wall and ceiling mount/stand for Tapo C500/C510W/C520WS cameras, white with cable cover
TP-LINK bracket with cable cover for Tapo C500/C510W/C520WS cameras for wall, white. The plastic box for connecting cables is compatible with TP-Link cameras Tapo C500/C510W/C520WS and it is designed for indoor use on the wall using
TP-LINK wall mount DECO BE65 white
The holder is designed for attaching TP-Link DECO BE65 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.
