Searching "turris mox"

Turris Shield always updated dedicated firewall. Turris dedicated firewall, Marvell Armada 3720 1 GHz dual core, 1× GWAN port (RJ-45), 4× GLAN port (RJ-45), RAM 512 MB DDR3. Turris Shield is a device that, thanks to its unique firewall, protects

Turris MOX Classic is first open source modular router with Gigabit WAN port (for PoE support is necessary buy MOX PoE module), 12V DC power connector, four Gibabit LAN ports and dual Wi-Fi with 802.11a/b/g/n/ac support with modulation sp

Turris MOX Power Wi-Fi is first open source modular router with Gigabit WAN port (for PoE support is necessary buy MOX PoE module), 12V DC power connector and dual Wi-Fi with 802.11a/b/g/n/ac support with modulation speed 300Mbps (

Turris MOX Pocket Wi-Fi is first open source modular router with Gigabit WAN port (for PoE support is necessary buy MOX PoE module), 12V DC power connector and Wi-Fi with 802.11b/g/n support with modulation speed 300Mbps (2.4GHz).

Turris MOX Start is first open source modular router with Gigabit WAN port (for PoE support is necessary buy MOX PoE module) and 12V DC power connector. Everyone who prefers an easy-to-use, uncompromising security solution will appreciate

MOX B allows you to add more hardware to your configuration. It contains a mPCIe slot for a compatible Wi-Fi card, disk controller or LTE modem. If you choose to install an LTE modem, the MOX B features a SIM card slot that you can use. If you use Wi-F

The MOX C module contains a four-port manageable switch for gigabit ethernet. Compatibility There can be only one MOX C module in the configuration; the SGMII bus is terminated there. For this reason, the MOX C cannot be combined

The MOX D module contains an SFP connector for an optical connection with speeds of up to 2.5 Gbps. Compatibility There can be only one MOX D module in the configuration; the SGMII bus is terminated there. For this reason, MOX D c

The MOX E module is an ideal choice if you need more ethernet ports to connect devices to your network. It has twice the width of the other modules and contains an eight-port manageable switch for gigabit ethernet. Compatibility U

The F module expands your configuration with more USB 3.0 ports with transfer speeds of up to 5 Gbps that you can use to connect external drives, TV tuners and other devices. Compatibility There can be only one MOX F module in the

The MOX G module with a mPCIe slot allows you to connect a compatible Wi-Fi card to achieve significantly higher speeds than SDIO (we recommend the original mPCIe MOX Wi-Fi add-on). It also has a SIM card slot for users who are considering a mPCIe LTE

The MOX PoE add-on can be used to provide power to the Turris MOX router over ethernet without having to use a separate power cable. It connects to the MOX A (Basic) module which is part of all MOX configurations. It is compliant with IEEE standards 80

WiFi card RTROM01-WS3294 is a wireless miniPCI-e card with 4× u.Fl connectors, support for WPA2 encryption, modulation speed up to 1733 Mbps in the 5GHz band (4×4 MU -MIMO) or 600 Mbps in the 2.4GHz band (4×4 MU-MIM

RTROM01-RTSF-10G is a 10-Gigabit SFP+ metal module with RJ45 connector for a metal cable with a data rate of 1G / 2.5G / 5G / 10 Gbps. The range of the module is 100 m at 1 Gbps, it is only 30 m at 10 Gbps using a Cat 6A cable. The mo

Wireless set of two adhesive antennas with pigtails terminated with u.Fl connectors and Dual Band WiFi 6 cards with Mediatek MT7915DAN chipset, miniPCI-e bus with 2x u.Fl connectors, supporting WPA2 encryption, modulation speed

The Mox Classic Wi-Fi 6 is designed for all technology enthusiasts. This setup, with a powerful processor, consists of 3 modules that together provide a wired connection of 1Gbps for up to 4 devices and cover the area with a wireless signal in t

The Mox Classic Power Wi-Fi 6 is designed for all technology enthusiasts. This model is already ready to cover the area with 802.11ax (Wifi 6) and transmits a dual-band signal in the 2.4 GHz band at speeds of up to 574 Mbps and in the 5 GHz band

Power adapter RTMX-PA1030 from Turris company with a standard 5.5 / 2.1mm connector is a replacement power adapter for Turris MOX, but it is also suitable as a power adapter for LED strips because output voltage is 12V DC. The maximum

RTMX-N-001-prt-005 is a set of two pieces (bottom and top part) of spare connecting plastics in the shape of hexagons, which connect the individual parts / modules of the Turris MOX router.