Ubiquiti EP-S16, EdgePoint WISP switch, 16x GLAN, 2x SFP/SFP+
Your price excl. VAT
520.21 EUR
| Recycling fee | 0.07 EUR |
|---|---|
| Your price with RF | 520.28 EUR |
| Your price incl. VAT (21%) | 629.54 EUR |
| blank |
Availability
at our branches
at our branches
Per orig. box:
4 pcs.
| Manufacturer |
Ubiquiti |
|
|---|---|---|
| Code | 10410126 | |
| Part No. | EP-S16 | |
| Warranty | 24 months | |
ETH-SP-G2
9.98 EUR excl. VAT
12.16 EUR incl. VAT
In Stock
CT-290-48-B
6.27 EUR excl. VAT
7.59 EUR incl. VAT
In Stock
OFTP5E24-MSC
128.93 EUR excl. VAT
156.01 EUR incl. VAT
In Stock
ML-S+85D-03
8.44 EUR excl. VAT
10.30 EUR incl. VAT
In Stock
ML-S+31D-10
13.65 EUR excl. VAT
16.60 EUR incl. VAT
In Stock
ML-S+2733-10
18.54 EUR excl. VAT
22.52 EUR incl. VAT
In Stock
ML-S+3327-10
18.54 EUR excl. VAT
22.52 EUR incl. VAT
In Stock
PCU5E-1YW-MS
0.57 EUR excl. VAT
0.69 EUR incl. VAT
In Stock
PCU5E-5-MSC
3.43 EUR excl. VAT
4.15 EUR incl. VAT
In Stock
Parameters
Download
Technical parameters
Connectors and Interfaces
LAN speed:
(16) 10/100/1000Mbps
Optical interfaces:
(2) 1G/10Gbps
Serial port:
RJ45
Power
Power type:
PoE, DC terminal
PoE type:
PoE-Out + PoE-In
PoE-Out standards:
802.3af, 802.3at, Passive 24V, Passive 48V
PoE Out ports:
16
Max. power consumption [W]:
40
Power via connector/terminal:
42 .. 56V DC
Physical characteristics
Design:
Outdoor
Fans:
No
Chassis design:
Metal
Buttons:
Reset
Operating temperature [°C]:
-20 up to 65
Width [mm]:
326
Height [mm]:
382
Depth [mm]:
88
General
MAC address table:
16000
Software
Web management:
Yes
Management:
Web management
Features:
VLAN, QoS, DHCP snooping
Default IP address:
192.168.1.2
Default login and password:
ubnt / ubnt
Product description
Ubiquiti EdgePoint EP-S16 is an Gigabit L2/L3 outdoor switch with output POE on all 16 ports and input POE on the first two ports. With this product, you no longer have to pull the cables from the roof to the lower floors for each active element separately, or invent a complex solution including an outdoor cabinet, switch installation, power and POE. You now have all in one.
Connectors and interfaces
The device is very rich and includes (16) 10/100/1000Mbps Ethernet ports with PoE, (2) SFP/SFP+ 1/10Gbps ports, (1) serial RJ45 port and DC terminal block for direct power connection. The whole device is powered by an ARM processor Cortex-A9 with a 400MHz clock, 256MB RAM and 32MB of internal storage.
POE IN - Ethernet power supply for the EdgePoint EP-S16 has its limits, and for multiple connected devices it is recommended to use DC terminal power supply. If necessary, ports 1 and 2 are designated for POE IN purpose. The whole unit is powered via passive POE 54V / 1.5A by wires (+1, 2, 4, 5; -3, 6, 7, 8). If POE IN is used on ports 1 or 2, it is not possible to use the POE Out function on these ports.
POE Out - Ports are divided into two groups according to consumption and at the same time according to the wires over which the power is routed.
Advanced operation system
Designed for convenient management, the EdgeOS Configuration Interface allows administrators to configure and monitor switch features in a graphical user interface. The EdgeSwitch uses a sophisticated operating system that provides basic switching features, PoE configuration per port, and a variety of advanced features including: MSTP/RSTP/STP, VLAN, Link Aggregation, DHCP snooping, RADIUS, 802.1X and much more.
Package contents
Download
Datasheet Quick Start GuideTechnical support for this product is available on rma@discomp.cz email or sending a request via web form. Our technical support is available during this business hours.
Bussines information
Dan Pacanda, +420 377 221 177 , dan.pacanda@discomp.cz