Pigtails for miniPCI

Pigtail with u.Fl and RSMA female connectors, 25cm long, designed for the frequency range 0 to 6GHz with attenuation of max 1.5dB. This is a quality reduction, eg for connection to miniPCI cards, etc.

Cable adapter from MMCX to RSMA male , 25cm long. Designed for the frequency range 0 to 6GHz with attenuation of max 1.5dB. The MMCX and RSMA male connectors are angled 90 °. This is a quality reduction, eg for connection to mi

U.fl-SMA female pigtail, that can be used to connect your LTE card to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these pigtails)

Pigtail with MMCX and RSMA female connectors, 25cm long, designed for the frequency range 0 to 6GHz with attenuation of max 1.5dB. The MMCX connector is rotated 90°. This is a quality reduction, eg for connection to miniPCI cards, etc.

Pigtail with u.Fl and N female, 25cm long, designed for the frequency range 0 to 6GHz with attenuation of max 1.5dB. This is a quality reduction, eg for connection to miniPCI cards, etc.

SMA female pigtails are commonly used for 3G/LTE modem antenna ports.

Cable reduction from MMCX to N male, 25 cm long, designated frequency range from 0 to 6 GHz with attenuation max 1,5 dB. Connector MMCX is rotated to 90°. High quality reduction used for example for connection between miniPCI cards, etc

Pigtail cable u.Fl (IPEX) to RSMA female, 15cm long, designed for frequency range 0 up to 6GHz with maximum attenuation 1,5db. It is a very quality RF cable reduction from antenna to miniPCI cards.

Cable reduction from MMCX to N female, 25 cm long, designated frequency range from 0 to 6 GHz with attenuation max 1,5 dB. Connector MMCX is rotated to 90°. High quality reduction used for example for connection between miniPCI cards, e

Pigtails are necessary to connect antenna to radio card or, if radio is part of a board, directly to the routerboard.

The connecting cable is primarily intended for Turris Omnia wi-fi modules to connect with a diplexer and an external antenna. However, it can also be used with other devices that operate at a maximum frequency of 6 GHz VF cable reduction (pig

The connecting cable is primarily intended for Turris Omnia wi-fi modules to connect with a diplexer and an external antenna. However, it can also be used with other devices that operate at a maximum frequency of 6 GHz VF cable reduction (pig

The connecting cable is primarily intended for Turris Omnia wi-fi modules to connect with a diplexer and an external antenna. However, it can also be used with other devices that operate at a maximum frequency of 6 GHz VF cable reduction (pig

Propojovací kablík je primárně určen pro wi-fi moduly Turris Omnia k propojení s diplexerem a externí anténou. Lze však použít i s jinými zařízeními, které pracují na max frekvenci 6 GHz; VF kabelová redukce (pigtail) řady U.FL(f) s kabelem RF1.13/0.81...

Cable convertor from MMCX to N male, 25 cm long, designed for the frequency range from 0 to 6 GHz with attenuation max. 1.5 dB. The MMCX and N male connectors are rotated on 90 °. This is a quality convertor used, for example, for connect

Cable convertor from RSMA male to RSMA male, 25 cm long, designed for the frequency range from 0 to 6 GHz with attenuation max. 1.5 dB. Both connectors are straight. The cable is suitable for connecting units with RSMA female ou

Kabelová redukce z RSMA female na CRC9 , 15cm dlouhá, určená pro frekvenční rozsah 0 až 6GHz s útlumem max 1,5dB.

Redukční kabel pro připojení externí antény k miniPCI adaptéru osazeného výstupním konektorem MMCX. Délka: 20cm; Konektor 1: MMCX; Konektor 2: reverzní SMA male; Kabel: nízkoútlumový 50ohm koax RG316U; Hodnoty útlumu vf koaxiálního kabelu RG316; 2,4GHz...

Cable convertor from u.Fl to N male, 25 cm long, designed for the frequency range from 0 to 6 GHz with attenuation max. 1.5 dB. This is a quality convertor used, for example, for connecting to miniPCI cards, etc.

Pigtail with u.Fl and SMA male connectors, 25cm long, designed for the frequency range 0 to 6GHz with attenuation of max 1.5dB. The SMA male connector is rotated 90°. This is a quality reduction, eg for connection to miniPCI cards, etc.

Cable convertor from u.Fl to N male, 25 cm long, designed for the frequency range from 0 to 6 GHz with attenuation max. 1.5 dB. N male connector is rotated on 90 °. This is a quality convertor used, for example, for connecting to miniPCI

Cable convertor from MMCX to SMA male, 25 cm long, designed for the frequency range from 0 to 6 GHz with attenuation max. 1.5 dB. The MMCX and SMA male connectors are rotated on 90 °. This is a quality convertor used, for example, for con

Cable convertor from MMCX to RSMA female, 25 cm long, designed for the frequency range from 0 to 6 GHz with attenuation max. 1.5 dB. Connectors MMCX and RSMA female are straight. This is a quality convertor used, for example, for connecti