Accessories
29 items
TP-Link D-M4/E4 Wallmount holder for DECO M3/M4/E4/P9, white
D-M4/E4
9.73 EUR excl. VAT
11.77 EUR incl. VAT
The holder is designed to attach TP-Link Deco E4 and M4 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer in a white colour.
TP-Link D-M5 Wallmount holder for DECO M5, white
D-M5
9.73 EUR excl. VAT
11.77 EUR incl. VAT
The holder is designed for attaching TP-Link Deco M5 and P7 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.
TP-Link D-EAPWALL-C Wallmount mounting box for EAP235 and EAP615-Wall, white
D-EAPWALL-C
12.69 EUR excl. VAT
15.35 EUR incl. VAT
The plastic mounting box is intended for covering the cables and attaching the wall-mounted WiFi AP EAP235 and EAP615-Wall from TP-Link to the wall using two screws. The holder is made of PETG material on a 3D printer, it is white in color
TP-Link D-EAP2X Holder for EAP devices EAP225, EAP245 and EAP265, white
D-EAP2X
14.31 EUR excl. VAT
17.32 EUR incl. VAT
The plastic holder/stand is designed to mount selected TP-Link EAP products (see below) on a table or wall. 3 holes are made in the base measuring 83 × 100 mm to attach the bracket to the wall. The overall dimensions of the holder are
TP-Link D-TP158 Racmount holder for SG108xx/SG1006P/ER605/RP108GE, gray
D-TP158
13.52 EUR excl. VAT
16.36 EUR incl. VAT
The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime
D-CKG2+ Rackmount holder for UCK-G2-PLUS, gray
D-CKG2+
15.42 EUR excl. VAT
18.66 EUR incl. VAT
The plastic holder is designed to mount the UCK-G2-PLUS from Ubiquiti to 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other.
TP-Link D-EAPWALL Holder/stand for EAP235-Wall. EAP615-Wall, grey antracit
D-EAPWALL
13.52 EUR excl. VAT
16.36 EUR incl. VAT
Plastový stojan pro TP-Link EAP235-Wall a EAP615-Wall WiFi Access point jednotky. Stojan umožňuje instalace na stůl (rozměr podstavce je 81x120mm). Celkové rozměry stojanového držáku jsou 81 x 120 x 88 mm a je vyroben z šedého PETG fillamentu pomocí 3D...
TP-LINK wall mount DECO BE65 white
D-BE65
13.52 EUR excl. VAT
16.36 EUR incl. VAT
The holder is designed for attaching TP-Link DECO BE65 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.
D-U6-L Wallmount holder for Ubiquiti U6-Lite, UAP-nanoHD and UAP-AC-Lite, white
D-U6-L
17.32 EUR excl. VAT
20.96 EUR incl. VAT
The plastic holder is used for the horizontal installation of UniFi Access Points from Ubiquiti U6+, U6-Lite, UAP-nanoHD and UAP-AC-Lite on the wall or as a stand on a table. The holder can be installed with the UniFi plate up
D-MT750 Rackmount holder for MikroTik devices RB750Gr3, RB750r2, RB750UPr2 and RB760iGS, gray
D-MT750
11.63 EUR excl. VAT
14.07 EUR incl. VAT
The plastic holder is designed to hold selected MikroTik products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime
TP-Link D-TP100 Rackmount holder for OC200/SF1005xx/SG105xx/SG1005xx, gray
D-TP100
11.63 EUR excl. VAT
14.07 EUR incl. VAT
The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime
TP-Link D-Halo Wallmount holder for Halo H50/H30/S12/S3, white
D-Halo
9.73 EUR excl. VAT
11.77 EUR incl. VAT
The plastic wall mount is designed to mount Halo H50 / H30 / S12 / S3 Mesh Access Points from Mercusys. The holder is made using 3D printing, has a white color and its dimensions are 123 × 40 × 91mm.
TP-Link D-X20/X60 Wallmount holder for DECO X20/X50/X60, white
D-X20/X60
11.35 EUR excl. VAT
13.73 EUR incl. VAT
The holder is designed to attach TP-Link Deco X20, Deco X50 and X60 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer and the colour is white.
D-MTACX Rackmount holder for MikroTik devices hAP AC2/hAP, gray
D-MTACX
12.69 EUR excl. VAT
15.35 EUR incl. VAT
Plastový držák je určený pro uchycení vybraných MikroTik produktů (viz níže) do 19" a 10" racku . V případě uchycení do 19" racku je možnost uchycení vpravo, vlevo nebo dvou držáků vedle sebe. Vnitřní rozměry rámečku jsou 119 x 33 mm. Kompatibilní se z...
TP-Link D-M9 Wallmount holder for DECO M9, white
D-M9
13.52 EUR excl. VAT
16.36 EUR incl. VAT
The holder is designed for attaching TP-Link Deco M9 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.
TP-Link D-EAP6X Holder for EAP devices EAP650 and EAP653, grey
D-EAP6X
17.32 EUR excl. VAT
20.96 EUR incl. VAT
Plastový držák/stojan je určený pro uchycení vybraných TP-Link EAP produktů (viz níže) na stůl či zeď . Pro uchycení držáku na zeď jsou v podstavě o rozměrech 83 x 100 mm vytvořeny 3 otvory. Celkové rozměry držáku jsou 106 x 83 x 153 mm. Kompatibilní s...
TP-Link D-EAPOUT Ceiling bracket for EAP610-Outdoor, grey
D-EAPOUT
25.82 EUR excl. VAT
31.24 EUR incl. VAT
Plastový stojan pro TP-Link EAP610-Outdoor venkovní WiFi jednotku. Stojan umožňuje instalace na strop (rozměr podstavce je 83x100mm) nebo na stůl. Patice držáku umožňuje bezproblémové držení EAP jednotky, ať už je držák na stole či na stropě. Rozměry d...
D-U6-P Wallmount holder for Ubiquiti U6-PRO and UAP-AC-PRO, white
D-U6-P
18.98 EUR excl. VAT
22.97 EUR incl. VAT
The plastic holder is used for horizontal installation of UniFi Access Points from Ubiquiti U6-PRO and UAP-AC-PRO on the wall or as a stand on a table. The holder can be installed with the UniFi plate up and down and
TP-Link D-HX220 - Wallmount holder for HX-220/HC-200, white
D-HX220
12.46 EUR excl. VAT
15.08 EUR incl. VAT
Plastový držák je určený pro uchycení bezdrátových jednotek HX220 a HC220 značky TP-Link na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 110 x 140 x 40mm.
TP-Link D-TP226 - Racmount holder for TL-SG108-M2/TL-SX105/ER7206/ER7212PC, gray
D-TP226
37.13 EUR excl. VAT
44.93 EUR incl. VAT
Plastový držák je určený pro uchycení vybraných TP-Link produktů (viz níže) do 19" a 10" racku . V případě uchycení do 19" racku je možnost uchycení vpravo, vlevo nebo dvou držáků vedle sebe. Vnitřní rozměry rámečku jsou 226 x 131 x 35mm. Kompatibilní ...
TP-Link D-HaloX Wallmount holder for HALO H70X/H80X, white
D-HaloX
12.46 EUR excl. VAT
15.08 EUR incl. VAT
Plastový držák je určený pro uchycení bezdrátových jednotek HALO H70X a HALO H80X značky MERCUSYS na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 135 x 116 x 40mm.
TP-LINK DIN rail holder for SG108xx/SF1006P/ER605/RP108GE
D-TPDIN158
14.00 EUR excl. VAT
16.94 EUR incl. VAT
The holder is designed for attaching TP-Link switches to a DIN rail holder. It is made of PETG material on a 3D printer in a grey anthracite color. Dimensions: 101x25mm Compatible products: SG108xx, SF1006P, ER605, RP1
TP-LINK DIN rail holder for OC200/SF1005xx/SG105xx/SG1005xx
D-TPDIN100
8.66 EUR excl. VAT
10.48 EUR incl. VAT
The holder is designed for attaching TP-Link switches to a DIN rail holder. It is made of PETG material on a 3D printer in a grey anthracite color. Dimensions: 98x25mm Compatible products: OC200, SF1005xx, SG105xx, SG1
TP-LINK bracket for Archer NX200 on the wall white
D-5GNX
14.00 EUR excl. VAT
16.94 EUR incl. VAT
The holder is designed for attaching TP-Link Archer NX200 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.
TP-LINK wall mount for HX510 white
D-HX510
16.21 EUR excl. VAT
19.61 EUR incl. VAT
The holder is designed for attaching TP-Link HX510 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.
TP-LINK bracket for DECO BE25 for ceiling and wall mounting, white
D-BE2X
13.52 EUR excl. VAT
16.36 EUR incl. VAT
Plastic holder manufactured using 3D printing technology with PETG material, designed for mounting the Deco BE25 unit on the wall or ceiling, with three screw holes.
New product
TP-LINK wall mount/stand for cameras TAPO C501GW, white with cable cover
D-CXG-C
16.21 EUR excl. VAT
19.61 EUR incl. VAT
Plastic holder, designed to cover cables and mount the Tapo C501GW camera on the wall using 4 screws (not included in the package). Manufactured using 3D printing with PETG material.
New product
TP-LINK holder/stand for EAP devices EAP6X-UNI anthracite gray
D-EAP6X-UNI
20.36 EUR excl. VAT
24.64 EUR incl. VAT
Plastic holder, 3D-printed using PETG material. Compatible with TP-Link EAP access points. 610 613 620 HD 650 653 660 HD 670 670 v2
New product
TP-Link D-XE75 Wallmount holder for DECO XE75/XE75 Pro, white
D-XE75
13.52 EUR excl. VAT
16.36 EUR incl. VAT
The holder is intended for attaching selected Deco wireless Access Point units of the TP-Link brand to the wall using two screws. The holder is made of PETG material on a 3D printer and is white in color. The mount is only compatible
Filters
×
