Accessories

DIN Rail adapter PR5MEC00 Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

AUTOMOTIVE POWER SUPPLY, 9-30VDC, 2A, dedicated for Teltonika products (RUT 230/240/850/900/950/955, RUTX08/09/10/11/, TRB140/141/142/145)

Teltonika PR5MEC25 TSW2 Rear panel with DIN Rail holder is suitable for TSW200 and TSW210. Technical data Mounting type: 35 mm DIN Rai

LTE antenna with 2.5dBi gain and two 3m cables terminated with SMA Male connectors for 698-960 MHz and 1710-2690 MHz bands. The antenna is suitable not only for all Teltonika routers that are equipped with SMA connectors for connecting an exter

Teltonika 2m power supply cable terminated at one end with a 4-pin connector and at the other end with a screw terminal block. The cable is primarily intended for powering the following Teltonika devices: RUT230

Mobile adhesive SMA Antenna for the bands of 824-960/1710-2170 MHz and 2 dBi max. gain, 3m cable lenght, type of mounting - adhesive. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TR

Teltonika PR5MEC23 DIN Rail KIT adapter is possible to use almost with all Teltonika products, please see Related products and Datasheet. Technical data Mounting type: 35 mm DIN Rail Material: B

Teltonika PR317EUA is power supply with power of 62 W. This power supply could be used with Teltonika devices: TSW200, TWS202 and TSW212. Technical data

Teltonika PR3PUPS3 is power supply with power of 9 W. This power supply could be used with Teltonika devices - see related products . The package contents 4 input connectors which are very easy to switch. EU (Type C), US (Type A), U

Teltonika Bat120 is a small UPS that only works with DC voltage and hides a small 2300 mAh battery (17 Wh) for bridging short outages for Teltonika Facility with 4-pin connector. On the one hand, the input and output

Teltonika PR318EUA is power supply with power of 130 W. This power supply could be used with Teltonika devices: TSW200, TWS202 and TSW212. Technical data

Teltonika PR5MEC19 SIM Card Adapter Kit is suitable for every Teltonika device with SIM card slot. Technical Data Cardboard material: Kraft eco - friendly SIM needle material: Stainless steel

Compact plastic DIN Rail adapter (70x25x14,5mm) PR5MEC11, Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Combo antenna with a total of five 3m cables, terminated with 3x SMA Male and 2x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated with

Mobile magnetic SMA Antenna for the bands of 699-868MHz, 1850-2690MHz and 2 dBi max. gain, 3m cable lenght, type of mounting - magnetic. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB1

Teltonika 035R-00143 is a special power adapter with atypical 4-pin connector designed for Teltonika RUT 230/240/850/900/950/955 units, or newer. The power adapter has a maximum power of 9W, an output voltage of 9V and a current of 1A.

WiFi magnetic RP-SMA Antenna for the frequency of 2.4-2.4835 GHz and 2 dBi gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955.

Teltonika PR1KC640 5G combo MIMO mobile/GNSS/Wi-Fi roof SMA antenna. Comes with 4x SMA (5G), SMA (GNSS), 2 x SMA (WiFi). Antenna is compatible with RUTX50 and TRB500. Operation frequencies: 5G: 617 - 960, 1710 - 2690,

Teltonika PR2VM20M SMA is cable extension with lenght of 2000 mm with SMA connectors (female a male).

Use the PR5MEC22 Surface Clip Holder Kit to provide a stable and secure base for your Teltonika router (RUT200, RUT240, RUT241, RUT260, TRB245, TRB246, TRB255 and TRB256). This holder kit comes with a high-quality surface clip that

Teltonika PR5MEC24 TSW1 Rear panel with DIN Rail holder. This panel is compatible with Teltonika TSW100 and TSW101. Technical Data Mounting type: 35 mm DIN rail Dimensions:

WiFi magnetic RP-SMA Antenna for the frequency of 2400-2483.5/5150-5905 MHz and 3 dBi max. gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for RUTX10 and RUTX11.

GNSS ADHESIVE SMA ANTENNA for the band of 1575.42-1602 MHz and 2 dBi gain, 3m cable lenght, type of mounting - adhesive. Recommended for RUT955/RUTX09/RUTX11/TRB245

2×3 PIN connector is primary intended for Teltonika products RUT955, RUT956 and TRB145. The connector contains total of 6 holes for cables with a cross-section of 16 to 24 AWG.

Teltonika PR5MEC26 Rack mounting KIT is produced for one product - Teltonika RUTXR1. Technical data Mounting type: 1U Rack mounting Material: Copper - Nickel Silver Alloy C7521

Teltonika PR4IO17K I/0 2x8pin connector Technical Data Insulation material: PA66 Contact material: Copper alloy Contact finishing: Tin-plated Wire cross section: 0.2 –

Teltonika PR5MEC15 Connectors set for devices RUT906, RUT955 and RUT956. Technical data: Voltage rating: 300 V Current rating: 8 A Withstand voltage: 1600 V/1min

Teltonika PR3P2EU3 EU power supply is for RUTX12DUAL and RUTX14. Technical Data Input frequency: 50 / 60 Hz Input current: 0.8 A Input connector: EU (Type C)

Teltonika PR320EUA is power supply with power of 250 W. This power supply could be used with Teltonika devices: TSW200, TWS202 and TSW212. Technical data Input frequency: 50 / 60 Hz Input current: 3,9

Teltonika PR3PREU6 is power supply with power of 9 W. This power supply could be used with Teltonika devices - see related products . Technical data Input