PC Engines Alix

Antenna for 2.4 GHz and 5 GHz band, 5 dBi peak gain in 2.4 GHz band. Reverse SMA connector. Dual band antennas are always a compromise, use single band antennas for best gain in a specific frequency band...

R11eL-FG621-EA is an LTE modem in mini PCIe card format. It supports LTE and 3G technologies. It is a high quality modem that has 300 Mbps downlink and 50 Mbps uplink. Thanks to carrier aggregation, the device can use multiple bands sim

R11e-5HacD is our new 802.11ac card in miniPCI-express format, perfect for any RouterBOARD with miniPCIe slot, such as RB953, RB912, RB922, RB800 or x86 devices with RouterOS. The card features built-in LED indicators for wireless mode, conne

SMA female pigtails are commonly used for 3G/LTE modem antenna ports.

R11e-2HPnD is our new 802.11b/g/n Dual Chain high power 1000mW miniPCI-e card, operating in full 2192-2732 MHz frequency. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapters - RB14e/RB14eU. Unit is equipped with two MMCX connect

An extra cost-effective upgrade of our previous R11 LTE4 modem. It offers the same speed (up to 150 Mbps) and features as the earlier version.

R11e-2HnD is a Low-profile Lower power version of our 2.4Ghz miniPCIe card - it has a small heat-sink, u.Fl connector and less output power (800mW). Low profile is useful if you need to install the card in device like a laptop.

WLE600V5-23 je 802.11ac bezdrátový adaptér, který pracuje v pásmu 5 GHz a je k distopizici v PCI-e provedení. Díky QCA9882 chipsetu WLE600V5-23 výrazně zvyšuje celkovou propustnost až na 867Mbps při 2x2 MIMO. Využití revoluční 11ac technologie, WLE600V...

The metal latch sockets on apu boards don't always latch as nicely as they should. Please make sure the latch is properly seated to avoid cards unsocketing during shipment of assembled systems. mSATA and miniPCI express slots look exactly the same, but

Pigtail cable u.Fl (IPEX) to RSMA female, 15cm long, designed for frequency range 0 up to 6GHz with maximum attenuation 1,5db. It is a very quality RF cable reduction from antenna to miniPCI cards.

Red mounting box designed for the ALIX.2 model line and APU 1 / 2 / 3. The box contains holes for 3 x LAN, 3 x SMA, RS-232 serial port and 2 x USB.

SATA kabel pro desky APU.1C, kombinovaný s napájením (na straně zařízení), oddělená data a 2PIN napájení (na straně APU). Délka SATA kabelu je 7cm.

Blue mounting box designed for the ALIX.2 model line and APU 1 / 2 / 3. The box contains holes for 3 x LAN, 3 x SMA, RS-232 serial port and 2 x USB.

Grey mounting box designed for the ALIX.2 model line. The box contains holes for 2 x LAN, 3 x SMA, RS-232 serial port and 2 x USB.

Grey mounting box designed for the ALIX.2 model line and APU 1 / 2 / 3. The box contains holes for 3 x LAN, 1 x SMA, RS-232 serial port and 2 x USB.

Black mounting box designed for the ALIX.2 model line and APU 1 / 2 / 3. The box contains holes for 3 x LAN, 3 x SMA, RS-232 serial port and 2 x USB.

UBNT SR71-15 mini PCI card with excellent sensitivity 97dBm with output power 500mW. This card belongs to the proven very powerful line of SuperRange cards. Its advantages are a high range of operating temperatures and very high sensitivity. This card

Black mounting box designed for the ALIX.2 model line. The box contains holes for 2 x LAN, 2 x SMA, RS-232 serial port and 2 x USB.

High power 4920-5920MHz 802.11a/n dual chain wireless card in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e. The card features built-in LED indicators for wireless mode, connection s

Use this fixture to allow easy installation of the heat spreader in a consistent location. apufix1a = heat spreader placement fixture for apu2 / apu3 / apu4 boards.

PC Engines apupad is a heat pad designed for the CPU or southern bridge to increase the life of your APU unit. When installing, the protective foil must be removed on both sides.

Indoor instalation box for APU Series, red colour. Enclosure with cutouts for 3x LEDs and 1x switch in front, cutouts for DB9, 4x LAN, 6x SMA connectors (2x each on the back, right and left side), DC jack in back. It is made of anodized or painted alum

Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 to 4 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of painted aluminum. RoHS compliant. Changes from case1c Cou

The blue color mounting box for the APU 4 series. The box includes holes for 4x LAN, 3x SMA, RS-232 serial port and 2x USB.

Product description prepares.

MiniPCI-express kartička EC25-E od výrobce Quectel slouží pro bezdrátový příjem LTE signálu kategorie 4 se standardním miniPCI-express rozhraním. Karta je optimalizována pro M2M a IoT aplikaci. Zvládne přenášet data rychlostí 150Mbps downlink a 50Mbps ...

WiFi card WLE900VX - wireless miniPCIe card to slot v1.1, operating with modulation speed up to 1300Mbps in 5GHz band or 450Mbps in 2,4GHz band. Card supports the 802.11ac standard and 3x3 MIMO technology! Of cours

120 GB mSATA SSD module, Kingfast, Silicon Motion SM2258XT controller, 120GB 3D TLC flash. 120 GB modul mSATA SSD pro použití s deskami řady APU. Kapacita 120 GB; mSATA konektor; Řídicí jednotka Silicon Motion SM2258XT;