Optical networks

Masterlan CFS3 Optical Fiber Stripper is designed for preparing optical fibers before splicing, removing the 250 µm protective coating from 125 µm optical fibers, as well as for stripping 2-3 mm protective jackets. The 140 µm opening and V-shape

4-channel CWDM Mux/Demux (1270 to 1330 nm) designed to increase the capacity of existing optical infrastructure, with rack-mountable options.

8-channel CWDM Mux/Demux (1450 to 1590 nm) designed to increase the capacity of existing optical infrastructure, with the option for rack mounting.

Masterlan optical outdoor patch cord suitable for outdoor installations, such as connecting a wireless backhoul with an optical port and data cabinet. The cable outer sheath is made of high-quality UV-stable material. Inside the cable are two ar

Masterlan optical outdoor patch cord suitable for outdoor installations, for example connecting a wireless link that has an optical port and a data switch. The cable sheath is made of high-quality UV-stable material resistant to UV radiation. In

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

As optical fiber access nodes keep moving closer to end users, OLTs are closer to end users. Deployment scenarios are complex and diversified. In this case, network needs OLTs with small volume and low density. The MA5801-FL04-H1 is a

Huawei FIK02 is an installation tool designed for use with FTTR optical self-adhesive cable. Its construction allows for consistent pressure to be applied along the entire cable path, ensuring better adhesion of the cable to various surfaces.

The Huawei OptiXstar EN8145B7Ns is an intelligent ONT router utilizing XGS-PON and Wi-Fi 7 technologies. It provides ultra-broadband access, high performance, and wide coverage. The device features 1x 2.5Gbit Ethernet port,

Self-bonding transparent fibers are applicable to indoor FTTH or FTTR networking scenarios. They are delivered with adhesive and can be quickly attached to suitable wall surfaces after the release film is removed After routing the optical

Self-bonding transparent fibers are applicable to indoor FTTH or FTTR networking scenarios. They are delivered with adhesive and can be quickly attached to suitable wall surfaces after the release film is removed After routing the optical

Maxlink ML-S+2733-10-HPE is a 10G SFP+ WDM module with a Tx 1270 / Rx 1330 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S+3327-10-HPE is a 10G SFP+ WDM module with a Tx 1330 / Rx 1270 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S+2733-10-H3C is a 10G SFP+ WDM module with a Tx 1270 / Rx 1330 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S+3327-10-H3C is a 10G SFP+ WDM module with a Tx 1330 / Rx 1270 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

The MikroTik DQ+BC0003-DS+ is a break-out cable that splits (1) QSFP56 200Gbps interface into (4) independent SFP56 50Gbps interfaces. The cable is 3 meters long, which is an ideal length to reach all the necessary locations

The Huawei eKitOptiX FG736 is a wireless dual-band Wi-Fi 7 router that is perfectly suited for combination with ONT units in bridge mode. It works simultaneously in the 2.4GHz and 5GHz bands, delivering a maximum total throughput of up to

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in

The Huawei OptiXstar HG8010N-10 is an ONT unit for use in bridge mode, equipped with (1) SC/APC port for connection to a GPON installation and (1) 2.5G port for connecting a router. It is ideally suited for scenarios where you pref

Huawei OptiXstar EG8140H5 je inteligentní ONT jednotka s funkcí routeru , navržená pro vysokorychlostní optické připojení v domácnostech i firmách. Zařízení podporuje technologii GPON a zajišťuje vysoký výkon při přenosu hlasu, dat i HD videa. Router n...

The UF-SM-PATCH-UPC-APC features an SC/UPC connector on one end of the cable and a SC/APC connector on the other end to help you build out your GPON network.

This cable allows you to connect device with a 40 Gbps QSFP+ port to a 4 others with SFP+ port allowing only 10Gbps transmit speed. The cable is 2 meter long.

TP-LINK´s TL-SM321B-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver, TL-SM321B-2 uses an integrated LC Bi-Directional optical interface connector and the data link

Masterlan outdoor armoured optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet.

The outdoor FTTH data cabinet with installation in the ground is used to connect optical cables in front of the house with very easy access. The data cabinet allows the connection of up to 48 optical fibers and the termination of several optical

The active Multi Mode optical cable is used for direct connection of two SFP28 ports with a link speed of 25 Gbps. This ultra-thin (3mm) optical cable is 10 m long but is also available in other variants. The cable i

The active Multi Mode optical cable is used for direct connection of two SFP28 ports with a link speed of 25 Gbps. This ultra-thin (3mm) optical cable is 20 m long but is also available in other variants. The cable i

Masterlan optical outdoor patch cord suitable for outdoor installations, for example connecting a wireless link that has an optical port and a data switch. The cable sheath is made of high-quality UV-stable material resistant to UV radiation. In

Masterlan outdoor optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet. Outer sh