UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

Pigtail with u.Fl and RSMA female connectors, 25cm long, designed for the frequency range 0 to 6GHz with attenuation of max 1.5dB. This is a quality reduction, eg for connection to miniPCI cards, etc.

ML-SFP-RJ45-1G is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Maximum distance range is 100m.

ML-S+31D-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices.

The ML-ALUBOX is a waterproof IP56 mounting enclosure with mast installation designed for mounting with the MikroTik RouterBOARD RB433 / RB411 / RB711 / RB911 and RB912. The box is fitted with 1 grommet for data / RF cable. The internal dimen

Passive PoE set of injector and extractor used to power most RouteBOARDs. It is a 100Mbps cable variant that can be used to power any device with a corresponding input power connector. The PoE set does not meet the IEEE 802.3af/at specifi

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products

Cable adapter from MMCX to RSMA male , 25cm long. Designed for the frequency range 0 to 6GHz with attenuation of max 1.5dB. The MMCX and RSMA male connectors are angled 90 °. This is a quality reduction, eg for connection to mi

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

ML-S+3327-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1330/1270nm. Module is "cisco compatible", so it is compatible with almost all active dev

ML-S31D-20 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 20km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.

ML-S+2733-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

MaxLink POES-8-7P-NOPS is highly versatile, highly compactible desktop unmanageable PoE switch. The switch has 8x 10/100Mbps ports whereas on seven ports you can use PoE Out function and thus connect/power any active element with the PoE supp

Pigtail with MMCX and RSMA female connectors, 25cm long, designed for the frequency range 0 to 6GHz with attenuation of max 1.5dB. The MMCX connector is rotated 90°. This is a quality reduction, eg for connection to miniPCI cards, etc.

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

Lead-acid battery with 12V and 45Ah capacity. The battery is equipped with two M6 connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage. The

MaxLink 10G SFP+ Direct Attach Cable, passive is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). T

ML-S+85D-03 is multimode 10G SFP+ module with 850nm wave length and 2 LC connectors for link at distance up to 300m. Module is "cisco compatible", so it is compatible with almost all active devices.

Lead-acid battery with 12V and 9Ah capacity. The battery is equipped with two Faston 6.3mm connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage.

MaxLink 10G SFP+ Direct Attach Cable, passive is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). T

ML-S85D-05 is 1.25G SFP module with wave length 850nm, 2 LC connectors for maximal distance 550m with multimode fiber. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products and with others m

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

MaxLink 10G SFP+ Direct Attach Cable, passive is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). T

PSBT-6-4P-250 is a 6 port 10/100Mbps PoE switch without management. Automatically detects and powers devices supporting PoE standard 802.3af/at (max. 30 W/port) on ports 1 to 4, on port 1 even supports PoE standard 802.3bt (60 W).

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 5m is terminated with crimped connectors, SMA female on one side and SMA male on the other. Due to low attenuat

The ML-WAP-H is an improved ability to hold any MikroTik wAP unit on a 20-65mm diameter mast that allows elevation and a more stable hold than the plastic or metal strap. No drilling is required to install the MaxLink bracket on the wAP u

Omnidirectional antenna with a gain of 8 dBi and vertical polarization for the 2.4GHz band. Ideal use for the distances up to 1 km. The antenna has N-Female connector.

ML-S31D-40 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 40km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.

MaxLink MAXPI15FE is a very simple 100Mbps PoE injector with one output POE port to power devices with 802.3af support with maximum consumption up to 24W, output voltage 48V and current 0.5A. The ma

POE-BOX8-G is a passive Gigabit PoE injector suitable for powering up to 8 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For poweri